RGB Interface TFT LCD Modules: 1.44 to 7 Inch References for OEM Products

SuccessLCD supplies TFT LCD modules with a parallel RGB interface from 1.44 to 7 inches, including the S500MIWI-04 (5-inch, 800 × 480, RGB) and the S700MI2XE-02 (7-inch, 1024 × 600, 24-bit RGB on a 50-pin FPC). An RGB panel takes its pixels straight from the LCD controller in a microcontroller or processor, so the pins and memory of the host decide which reference fits. This page lists the references, the host checks, and what can be adapted around the cell.

Request a quote TFT LCD catalogue

Frame buffer size of one RGB565 frame for eight RGB display resolutionsHorizontal bars show the memory for one 16-bit frame: 40,960 bytes at 128 by 160, 153,600 bytes at 240 by 320, 259,200 bytes at 360 by 360, 261,120 bytes at 480 by 272, 307,200 bytes at 320 by 480, 460,800 bytes at 480 by 480, 768,000 bytes at 800 by 480 and 1,228,800 bytes at 1024 by 600.One 16-bit (RGB565) frame, by resolution128 × 160STFT144D40,960 bytes240 × 320STFT32D, S35001D153,600 bytes360 × 360STFT18D259,200 bytes480 × 272S430MI2NI, S500MINI-06261,120 bytes320 × 480STFT35D307,200 bytes480 × 480STFT21D, S400MBZS-01D460,800 bytes800 × 480S500MIWI-04768,000 bytes1024 × 600S700MI2XE-021,228,800 bytesBytes = width × height × 2. The 3.5-inch S35001D is 320 × 240, the same pixel count as 240 × 320.Double buffering doubles each figure; 24-bit colour stored as 3 bytes per pixel is 1.5 times as large.
Figure: memory for one RGB565 frame across the RGB references. From 480 × 480 upward the frame no longer fits in the on-chip RAM of most microcontrollers.

RGB TFT LCD module references

These SuccessLCD references take a parallel RGB input. Each row links to its product page; values marked per project come from the datasheet of the quoted revision.

ReferenceSizeResolutionInterfaceTouchOutline (reference)
STFT144D1.44 in128 × 160RGBPer projectPer project
STFT18D1.8 in360 × 360RGBCapacitivePer project
STFT21D2.1 in480 × 480RGBPer projectPer project
STFT32D3.2 in240 × 320RGBPer projectPer project
S35001D3.5 in320 × 24024-bit RGB + SPICapacitive, G+G76.96 × 63.96 × 4.70 mm
STFT35D3.5 in320 × 480RGBPer projectPer project
S400MBZS-01D4 in square480 × 480RGB + SPICapacitive83.7 × 83.7 mm
S430MI2NI4.3 in480 × 272RGBNot fitted105.5 × 67.2 mm
S430MINS-154.3 in480 × 272RGBNot fitted105.5 × 67.2 mm
S500MINI-065 in480 × 272RGBNot fitted120.7 × 75.8 mm
S500MIWI-045 in800 × 480RGBNot fitted120.7 × 75.8 mm
S700MI2XE-027 in1024 × 60024-bit RGB, 50-pin FPCNot fitted164.8 × 99.8 mm

The 800 × 480 parts at 4.3 and 7 inches are listed with the larger panels on the HMI display modules page. The full range is in the TFT LCD module catalogue.

What the host needs to drive an RGB interface LCD

  • Pins. A 16-bit bus with PCLK, HSYNC, VSYNC and DE is 20 signals; a 24-bit bus is 28. Count them before choosing the microcontroller package.
  • Memory. An RGB panel holds no image of its own. The host refreshes it every frame from a frame buffer, usually by DMA.
  • Pixel clock. Frame rate equals the pixel clock divided by the clocks in one frame, which is the total clocks per line times the total lines, blanking included.
  • Set-up. Parts listed as RGB + SPI, such as the S35001D with its ST7272A driver, take initialization commands over SPI and then stream pixels over RGB.
  • Distance. A parallel RGB bus is meant for a short FPC to a nearby board.

Worked example: memory and pixel clock at 800 × 480 and 1024 × 600

One 16-bit (RGB565) frame for the S500MIWI-04 is 800 × 480 × 2 = 768,000 bytes. The S700MI2XE-02 needs 1024 × 600 × 2 = 1,228,800 bytes, or 1024 × 600 × 3 = 1,843,200 bytes with 24-bit colour stored as 3 bytes per pixel. For the clock, assume total timings of 1056 × 525 for 800 × 480 and 1344 × 635 for 1024 × 600, blanking included, and take the real values from the panel timing table. At 60 Hz that is 1056 × 525 × 60 = 33.3 MHz and 1344 × 635 × 60 = 51.2 MHz.

To run the numbers for your own timing, use the pixel clock and bandwidth calculator.

What can be customized on an RGB TFT module

The TFT cell is fixed by the panel fab, and its driver IC decides which interfaces it accepts. The module around it is what changes:

What each change involves is explained in what can be customized on a TFT module.

When another interface fits better

If the microcontroller has no RGB LCD controller, look at an SPI display whose driver IC has built-in frame memory. An application processor with a DSI output is better served by a MIPI display. When the display sits on a cable away from the board, an LVDS display carries the same image on four data pairs and a clock pair. The trade-offs are in interface options for an OEM TFT module.

What to send with an RGB display enquiry

  • The microcontroller or processor, its RGB bus width (16, 18 or 24-bit) and the RAM available for the frame buffer.
  • The window size and the outline limits in your enclosure.
  • Resolution, brightness and where the product is used.
  • Touch, cover lens and bonding needs.
  • Operating temperature range.
  • Expected annual quantity and project schedule.

A fuller list is in what to include in a TFT LCD module RFQ.

FAQ

Which RGB interface TFT modules does SuccessLCD offer?

Catalogue references with a parallel RGB interface run from the 1.44-inch STFT144D (128 × 160) to the 7-inch S700MI2XE-02 (1024 × 600), with 4.3-inch and 5-inch parts at 480 × 272 and 800 × 480 in between. Some, such as the S35001D, add SPI for set-up commands.

Can a microcontroller drive an RGB TFT LCD module?

Yes, if it has an RGB LCD controller and enough memory for the frame buffer. One 16-bit frame is 261,120 bytes at 480 × 272 and 768,000 bytes at 800 × 480, so the larger formats usually need external SDRAM or PSRAM.

Can an RGB TFT LCD module be customized?

Yes, around the TFT cell. The backlight, FPC, touch panel, cover lens and optical bonding can be adapted, and the initialization settings tuned. The cell size, the resolution and the interfaces its driver IC accepts come from existing parts.

Need an RGB TFT module for your product? Send the host, its RGB bus width, the window size and the resolution. SuccessLCD will match a catalogue reference and list what has to change, or browse the TFT LCD module catalogue first.

Request a quote

Scroll to Top
Get a QuoteWhatsApp