Custom LVDS Display Modules: 5 to 12.8 Inch TFT References for OEM Products
SuccessLCD supplies LVDS display modules as OEM references from 5 to 12.8 inches, in resolutions from 800 × 480 to 1920 × 1080. Each one starts from a standard TFT cell, and the parts around it are adapted to the product: the backlight, the FPC or cable, the touch panel, the cover lens and the bonding. This page lists the references, what to confirm about the LVDS link, and what to send with an enquiry.
Request a quote WhatsApp +86 134 3360 8240 TFT LCD catalogue
LVDS display references
| Reference | Size | Resolution | Touch | Outline (reference) |
|---|---|---|---|---|
| S500MHWS2-01 | 5 in | 800 × 480 | Not fitted | 120.7 × 75.8 mm |
| S700MB1XH-09 | 7 in | 1024 × 600 | Not fitted | 164.8 × 99.8 mm |
| S800MEKH-01 | 8 in | Confirmed for the project | Confirmed for the project | 192.8 × 116.9 mm |
| S10MB1XH-07C0 | 10.1 in | 1024 × 600 | Capacitive | 235 × 143 mm |
| S10MHYH-02 | 12.1 in | 1280 × 800 | Confirmed for the project | 277.7 × 180.6 mm |
| S80MHJH-04-W | 12.8 in | 1920 × 1080 | Confirmed for the project | 294.4 × 175 mm |
These are starting points. If your window or resolution falls between two of them, tell us the opening and we will check which standard cells fit. The full range is in the TFT LCD module catalogue.
What to confirm on an LVDS display before design freeze
- Colour depth and pair count. An 18-bit panel uses 3 data pairs and a clock pair. A 24-bit panel uses 4 data pairs and a clock pair.
- Data mapping. JEIDA and VESA place the colour bits on different pairs, and the host must match the panel.
- Channel count. Formats with a high pixel clock, such as 1920 × 1080, are commonly split over two LVDS channels.
- Timing. Take the pixel clock range and blanking from the panel datasheet, not from a similar panel.
- Connector, pin assignment and cable length, including whether power and backlight share the connector.
- Backlight drive. Check whether the LED driver is on the module or has to be on your board.
The layout numbers, cable rules and EMI checks are in LVDS TFT LCD EMI and signal integrity.
What can be customized
The TFT cell is fixed by the panel fab. The module around it is what changes:
- Backlight brightness, for products read in strong light. See high-brightness TFT LCD modules.
- FPC or cable: length, exit direction, connector and pin order.
- Capacitive touch and cover lens: outline, thickness, printing and surface treatment. See anti-glare vs anti-reflective cover glass.
- Optical bonding between cover and display. See optical bonding vs air gap.
What each change involves is explained in what can be customized on a TFT module, and the general route is on the custom TFT display page.
When another interface fits better
LVDS suits equipment where the display sits a cable length away from a processor board. If the host has no LVDS output, compare the cost of a bridge chip with choosing a panel that matches the host: a MIPI display for application processors with DSI, or an SPI display for microcontrollers. The trade-offs are in interface options for an OEM TFT module.
What to send with an LVDS display enquiry
- The host processor or bridge chip, and its LVDS output format.
- The window size and the outline limits in your enclosure.
- Resolution, brightness and where the product is used.
- Touch, cover lens and bonding needs.
- Operating temperature range.
- Expected annual quantity and project schedule.
A fuller list is in what to include in a TFT LCD module RFQ.
FAQ
What sizes of LVDS display does SuccessLCD offer?
The catalogue references are 5, 7, 8, 10.1, 12.1 and 12.8 inches, from 800 × 480 to 1920 × 1080. The 10.1-inch S10MB1XH-07C0 includes capacitive touch. Other sizes depend on which standard TFT cells are available, so send the window size you need.
Can an LVDS display be customized?
Yes, around the TFT cell. The backlight, the FPC or cable, the touch panel, the cover lens and optical bonding can be adapted. The cell size and resolution come from the panel fab and are chosen from existing parts.
What do I need to drive an LVDS display?
A host or bridge chip with an LVDS output that matches the panel in colour depth, pair count and data mapping. An 18-bit panel uses 3 data pairs and a clock pair, and a 24-bit panel uses 4 plus the clock.
Need an LVDS display for your product? Send the host, the window size, the resolution, and the brightness and touch you need. We will match a reference and list what has to change. Send an LVDS display enquiry, or browse the TFT LCD module catalogue.
