Custom MIPI Display Modules: 3.97 to 10.1 Inch MIPI DSI TFT References
SuccessLCD supplies MIPI display modules as OEM references from 3.97 to 10.1 inches, from 480 × 800 to 800 × 1280 pixels, most of them with capacitive touch. MIPI DSI carries the picture on a few high-speed pairs over a short FPC, which suits compact products built around an application processor. This page lists the references, what to confirm about the DSI link, and what to send with an enquiry.
Request a quote WhatsApp +86 134 3360 8240 TFT LCD catalogue
MIPI display references
| Reference | Size | Resolution | Interface | Touch |
|---|---|---|---|---|
| STFT397D | 3.97 in | 480 × 800 | MIPI | Capacitive |
| S400MB1ZS-01F2 | 4 in square | 720 × 720 | MIPI | Capacitive |
| STFT50-01D | 5 in | 800 × 480 | MIPI + RGB | Capacitive |
| S550MEKI-01 | 5.5 in | 720 × 1280 | MIPI | Not fitted |
| STFT1010D | 10.1 in | 800 × 1280 | MIPI | Capacitive |
The 4-inch square reference measures 84 × 84 mm and the 5.5-inch reference 70.25 × 127.61 mm. For the others the outline is confirmed for the project. The full range is in the TFT LCD module catalogue.
What to confirm on a MIPI display before design freeze
- Lane count and bit rate. The host must provide the number of data lanes the panel uses, at the rate its resolution and refresh need.
- Video mode or command mode. In video mode the host streams every frame. In command mode the panel keeps the picture in its own frame memory. Confirm which one the panel uses.
- Initialization sequence. A MIPI panel stays dark until the host sends the set-up commands for its driver IC. Ask for the sequence that matches the exact module revision.
- Native orientation. 480 × 800, 720 × 1280 and 800 × 1280 are portrait formats. If the product is landscape, the host has to rotate the image, so check that your display pipeline can do it.
- FPC length and routing. DSI is meant for short connections inside the product, with controlled-impedance pairs on the host board.
- Touch controller interface and its FPC, where touch is fitted.
Lanes, bit rates and the two operating modes are worked through in the MIPI DSI interface guide.
What can be customized
The TFT cell is fixed by the panel fab. The module around it is what changes:
- FPC: length, shape, connector and pin order.
- Capacitive touch and cover lens: outline, thickness, printing and surface treatment. See capacitive touch panel structures.
- Backlight brightness and optical bonding for products read in strong light. See sunlight-readable TFT displays.
What each change involves is explained in what can be customized on a TFT module, and the general route is on the custom TFT display page.
When another interface fits better
MIPI needs a host with a DSI output, which usually means an application processor. For a microcontroller, an SPI display or an RGB panel is the simpler choice. For equipment where the display sits a cable length from the processor board, an LVDS display is the usual fit. The trade-offs are in interface options for an OEM TFT module.
What to send with a MIPI display enquiry
- The host processor and the number of DSI lanes it offers.
- The window size, the outline limits and the mounting orientation.
- Resolution, brightness and where the product is used.
- Touch, cover lens and bonding needs.
- Operating temperature range.
- Expected annual quantity and project schedule.
A fuller list is in what to include in a TFT LCD module RFQ.
FAQ
What sizes of MIPI display does SuccessLCD offer?
The catalogue references are 3.97, 4, 5, 5.5 and 10.1 inches, from 480 × 800 to 800 × 1280 pixels. Four of the five include capacitive touch. Other sizes depend on which standard TFT cells are available, so send the window size you need.
Is a MIPI display better than an LVDS display?
Neither is better in general. MIPI DSI suits compact products where a short FPC connects the panel to an application processor. LVDS suits equipment where the display is a cable length away from the processor board.
Why does my MIPI display stay dark?
A MIPI panel needs an initialization sequence for its driver IC before it shows an image, and the lane count and timing must match. Check those three items against the module documents before suspecting the panel.
Need a MIPI display for your product? Send the host processor, the window size, the orientation, and the brightness and touch you need. We will match a reference and list what has to change. Send a MIPI display enquiry, or browse the TFT LCD module catalogue.
