10.1 Inch LCD Display Modules: 1024 × 600 or 1280 × 800, LVDS or MIPI

SuccessLCD’s 10.1 inch LCD modules start from the S10MB1XH-07C0 (1024 × 600, LVDS, capacitive touch) and the STFT1010D (800 × 1280, MIPI DSI, capacitive touch). Across our catalogue and public datasheets, a 10.1 inch LCD module comes in one of three formats: 1024 × 600 or 1280 × 800 on LVDS, or an 800 × 1280 portrait panel on MIPI DSI. Choose the resolution from the smallest text the screen must show, the interface from what your host processor outputs, and confirm the outline early, because 10.1-inch modules share a diagonal but not always a footprint. If the content needs more than 1280 × 800, move to a 12.8 or 15.6 inch panel instead of squeezing it in.

Request a quote TFT LCD catalogue

Outlines of 10.1, 12.1, 12.8 and 15.6 inch TFT modules to scaleFour module outlines drawn at the same scale and aligned at the lower-left corner: S10MB1XH-07C0, 10.1 inch, 235 by 143 mm, 1024 by 600, LVDS with capacitive touch; S10MHYH-02, 12.1 inch, 277.7 by 180.6 mm, 1280 by 800, LVDS; S80MHJH-04-W, 12.8 inch, 294.4 by 175 mm, 1920 by 1080, LVDS; S60MZJW-01, 15.6 inch, 350.7 by 205.27 mm, 1920 by 1080, eDP.10.1 inch and larger TFT outlines, drawn to the same scaleReference outlines from the SuccessLCD catalogue, aligned at the lower-left corner. 1 mm = 1.25 px.10.1 in: 235 × 143 mm350.7 mm (15.6 in)205.3 mmOutline (reference)S60MZJW-01350.7 × 205.27 mm15.6 in · eDPS80MHJH-04-W294.4 × 175 mm12.8 in · LVDSS10MHYH-02277.7 × 180.6 mm12.1 in · LVDSS10MB1XH-07C0235 × 143 mm10.1 in · LVDS12.1 in at 1280 × 800 adds size, not pixels: it has the same pixel count as a 1280 × 800 10.1 in panel.1920 × 1080 needs 12.8 in (dual-link LVDS) or 15.6 in (eDP) in this catalogue.
Figure: catalogue outlines of the 10.1, 12.1, 12.8 and 15.6 inch references at one scale; the 12.8 and 15.6 inch parts are the 1920 × 1080 options.

10.1 inch display dimensions: active area and outline

The diagonal is the only thing all 10.1-inch panels agree on. Public datasheets show how much the rest can move:

PanelResolution and interfaceActive areaPixel pitchOutline
Newhaven NHD-10.1-1024600BF-LSXP (datasheet)1024 × 600, LVDS222.72 × 125.28 mm0.2175 × 0.2088 mm235.00 × 143.00 mm
AUO G101EVN01.0 (datasheet)1280 × 800, LVDS216.96 × 135.6 mm0.1695 × 0.1695 mm229.96 × 149.7 mm
SuccessLCD S10MB1XH-07C01024 × 600, LVDS, PCAP touchOn the drawingOn the drawing235 × 143 mm (reference)
SuccessLCD STFT1010D800 × 1280, MIPI, PCAP touchOn the datasheetOn the datasheetConfirmed per project

Two details matter for the mechanical and graphics design. First, the 1024 × 600 panel uses 16:9 glass for a 1.71:1 pixel grid, so its pixels are not square: 0.2175 mm wide and 0.2088 mm tall. A circle drawn assuming square pixels comes out about 4 % wider than it is tall, so set the aspect correction in your graphics library. Second, the 1280 × 800 panel is 16:10, taller and narrower, and its outline differs by several millimeters in both directions. A bezel cut for one will not take the other, even though both are sold as 10.1 inch.

1024 × 600 or 1280 × 800

Resolution at a fixed size is really a choice of text quality and memory. The 1280 × 800 panel above has about 150 pixels per inch, the 1024 × 600 panel about 117 horizontally. Text 4 mm tall gets 4 ÷ 0.2088 ≈ 19 pixel rows on the first and 4 ÷ 0.1695 ≈ 24 rows on the second, which is the difference between readable labels and clean small print.

The cost lands in the host. A 16-bit (RGB565) frame buffer is 1024 × 600 × 2 = 1.2 MB against 1280 × 800 × 2 = 2.0 MB, and 24-bit color adds half again. On a microcontroller with external PSRAM that can decide whether double buffering fits; our frame buffer RAM calculator does the sums for other formats. On a Linux processor it rarely matters.

Pick 1024 × 600 for an HMI with large buttons and a few values, where a 7 inch screen would be cramped. Pick 1280 × 800 for dense tables, trend charts or small text.

LVDS or MIPI DSI at 10.1 inches

LVDS (low-voltage differential signaling) carries the pixel data on three or four differential pairs plus a clock pair. Both 10.1-inch formats fit comfortably on one link. Check whether the panel wants three data pairs (18-bit color) or four (24-bit): the AUO panel above lists three, while the Newhaven panel takes four and selects 6-bit or 8-bit input with a pin.

Worked example: do the two LVDS panels fit a single link? The 1024 × 600 datasheet gives a typical clock of 51.2 MHz with 1344 clocks per line and 635 lines per frame: 51.2 MHz ÷ (1344 × 635) = 60.0 Hz. The 1280 × 800 panel lists 68.93 MHz with 1408 × 816 totals: 68.93 MHz ÷ 1,148,928 = 60.0 Hz. LVDS serializes 7 bits per clock on each pair, so the pairs run at 7 × 51.2 = 358.4 Mb/s and 7 × 68.93 = 482.5 Mb/s. A common transmitter such as TI’s SN75LVDS83B accepts 10 to 135 MHz, so both need only a single link. Among the panels in this article, only the 1920 × 1080 ones need dual-link LVDS.

MIPI DSI (Display Serial Interface) panels such as the STFT1010D are native portrait, 800 × 1280. They suit processors with DSI lanes, and they save the LVDS transmitter. If the product is used in landscape, confirm that your graphics stack can rotate the frame without dropping frames. Lane counts, video and command mode are covered in our MIPI DSI interface guide.

10.1 inch HDMI LCD kits

A 10.1 inch HDMI LCD kit for a single-board computer is an LVDS or MIPI panel plus a converter board that decodes HDMI, because the glass itself does not take HDMI. That is fine for a prototype or a low-volume build where the computer may change. For production, if your processor has LVDS or DSI on its pins, route it to the panel and drop the board, which saves power and one more part to keep in supply. Our guide to OEM TFT interface options explains when an HDMI to LVDS board still makes sense.

Touch on a 10.1 inch module

Every 7 to 10.1 inch touch reference in our catalogue is projected capacitive (PCAP), and the S10MB1XH-07C0 comes with it fitted. For a separate cover-glass design, the S10GF2-94 is a standalone 10-inch PCAP panel with an FT5426G controller on I²C, and its 247 × 152 mm outline is larger than the 235 × 143 mm LCD module: the glass overhangs the module, which leaves a border for bonding or gasketing it to the enclosure. Plan the mounting around the glass, not the LCD. Our capacitive touch panel structures guide compares G+G, G+F and the other stacks.

When to go bigger: 12.1, 12.8 or 15.6 inches

A larger panel is not always more content. In our catalogue:

  • S10MHYH-02, 12.1 inch, 1280 × 800, LVDS, 277.7 × 180.6 mm. Same pixel count as a 1280 × 800 10.1-inch panel, so the gain is size: on 16:10 glass the pitch works out to about 0.204 mm instead of 0.170 mm. Choose it when users read from further away, not when you need more on screen.
  • S80MHJH-04-W, 12.8 inch, 1920 × 1080, LVDS, 294.4 × 175 mm. This is the step to full HD, and at 1080p60 the LVDS link has to be dual.
  • S60MZJW-01, 15.6 inch, 1920 × 1080, eDP, 350.7 × 205.27 mm. Use it if your processor has eDP rather than LVDS.

Going the other way, if the screen shows a handful of buttons and numbers, a 7 inch display on parallel RGB is simpler to drive and easier to fit.

10.1 inch LCD FAQs

What are the dimensions of a 10.1 inch display?

The active area is about 223 × 125 mm on 1024 × 600 panels built on 16:9 glass and about 217 × 136 mm on 1280 × 800 panels. The outlines in the datasheets above are 230 to 235 mm wide and 143 to 150 mm tall; our S10MB1XH-07C0 is 235 × 143 mm.

Is a 10.1 inch LCD 1024 × 600 or 1280 × 800?

Both are common, and 800 × 1280 portrait panels on MIPI DSI are a third option. 1024 × 600 suits simple HMIs with large controls; 1280 × 800 gives about 150 pixels per inch for dense text and charts.

Can I connect a 10.1 inch LCD display over HDMI?

Only through a converter board, because the panel itself takes LVDS or MIPI DSI. Kits that plug into HDMI carry that board; in production it is usually better to drive the panel from the processor’s own LVDS or DSI output.

Does a 10.1 inch LVDS panel need dual-link LVDS?

No. Typical clocks are about 51 MHz for 1024 × 600 and 69 MHz for 1280 × 800 at 60 Hz, well inside a single link. Dual link comes in at 1920 × 1080, which in our catalogue means the 12.8-inch S80MHJH-04-W.

Can SuccessLCD customise a 10.1 inch LCD module?

Yes, starting from a catalogue reference such as the S10MB1XH-07C0 or STFT1010D. The backlight, FPC, touch panel, cover lens and mechanics can be adapted; the cell size, resolution and interface stay with the panel.

Choosing a 10.1 inch or larger panel? Send the host processor, the resolution you need, the enclosure opening and whether touch is fitted. We will check the outline and interface against our 10.1 to 15.6 inch references. Browse the TFT LCD module catalogue or the LVDS and MIPI display module pages, see industrial TFT display modules, or ask about a 10.1 inch LCD.

Scroll to Top
Get a QuoteWhatsApp