Panel opening
Check the 66.00 × 45.00 mm minimum viewing area and the 69.00 × 50.00 mm rear glass outline against the enclosure.
PRODUCT EXPLORERFront view
Rotate, zoom and inspect the product. Loads on request.
Front rendering of S4032D, showing the display artwork and glass outline. Materials and fine geometry are visual references for the OEM project.
OEM DISPLAY REFERENCE
S4032D
HTN thermostat display with occupancy and fan-mode artwork
S4032D is an HTN, positive-mode segmented LCD reference with a large temperature field, a smaller Set At field and an UNOCCUPIED legend. Fan-speed, heating, cooling, battery and status indications complete the layout.
66.00 × 45.00 mmMinimum viewing area
3.0 VLCD operating voltage
A starting point for your custom display.
Images, 3D geometry and listed parameters are OEM reference information. Final dimensions, electrical requirements, optical configuration and construction are confirmed for your project.
Product video
Short product video. Playback starts when you press play.
01 / REFERENCE CONFIGURATION
Start with the essentials.
A reference configuration for discussing your LCD project. Final specifications are subject to project confirmation.
| Model reference | S4032D |
|---|---|
| Rear glass width × height | 69.00 ± 0.20 × 50.00 ± 0.20 mm |
| Front glass width × height | 69.00 ± 0.20 × 48.00 ± 0.20 mm |
| Minimum viewing area | 66.00 × 45.00 mm |
| LCD thickness | 2.00 mm maximum |
| Glass thickness per layer | 0.70 ± 0.07 mm |
| Pin pitch | 2.00 mm |
| Display mode | HTN, positive |
| Connection | Pins |
| LCD operating voltage | 3.0 V |
| Drive condition | 1/4 duty, 1/3 bias |
| Frame frequency | 64 Hz |
| Viewing direction | 12 o’clock |
| Rear polarizer | Transflective, adhesive |
| Front polarizer | Transmissive, adhesive |
| Operating temperature | 0 °C to +50 °C |
| Storage temperature | −10 °C to +60 °C |
02 / OEM DESIGN
Make the display fit your product.
Bring your requirements. We will review the configuration with you.
Thin glass stack
The drawing lists 0.70 mm glass layers and a 2.00 mm maximum LCD thickness. Review the support and mounting arrangement for the panel.
Pin and drive mapping
Review the lower pin row at 2.00 mm pitch with the 3.0 V, 1/4 duty, 1/3 bias drive requirements and the required fan-mode segments.
03 / APPLICATION DIRECTION
Temperature controllers
Use this reference to plan temperature, setpoint and operating-mode indications on a thermostat panel. Confirm the occupancy legend and fan-speed indications required by the controller.
04 / PRODUCT SUPPORT
From reference to your design.
Which LCD drive settings are listed for S4032D?
The reference lists 3.0 V LCD operating voltage and 1/4 duty, 1/3 bias, at 64 Hz frame frequency. Check these requirements against your LCD driver; final electrical requirements are confirmed for the project.
Does the UNOCCUPIED legend establish occupancy sensing?
The legend is a display segment. Occupancy detection, scheduling and the logic that activates the indication must be defined in the complete controller design.
YOUR NEXT LCD PROJECT
Let’s shape your display.
Share your required display content, enclosure space, drive arrangement, operating environment and target quantity.
