Segment LCD Displays: Catalogue References for OEM Products
SuccessLCD supplies custom segment LCD displays for OEM products and keeps close to 500 monochrome references on drawing, including the S4499D (FSTN positive, 34.60 × 18.70 mm viewing area, −40 to +80 °C) and the S4800D (DFSTN negative, 68.50 × 15.30 mm, 1/8 duty). A segment LCD shows fixed digits, icons and legends drawn on the glass, so every part is made for one product. The references show what a finished design looks like in a given mode, size and drive; a new project starts from your artwork.
Request a quote WhatsApp +86 134 3360 8240 Monochrome LCD catalogue
Segment LCD display references
These SuccessLCD references cover the common LCD modes and connections. Values come from each product drawing.
| Reference | Used in | Mode | Viewing area | Voltage, drive | Operating temp. | Connection |
|---|---|---|---|---|---|---|
| S4631D | Competition timers | TN positive, reflective | 126.54 × 40.72 mm | 3.3 V, 1/8 duty | 0 to +50 °C | Pins |
| S3689D | Body fat scales | TN positive, reflective | 65.80 × 39.30 mm | 3.0 V, 1/5 duty | 0 to +50 °C | Heat seal, 31 contacts |
| S3487D | Water purifiers | TN negative | 116.00 × 42.00 mm | 5.0 V, 1/4 duty | 0 to +50 °C | 47 pins |
| S4007D | Time and mileage meters | HTN positive, transflective | 62.40 × 43.40 mm | 3.3 V, 1/8 duty | −30 to +80 °C | FPC |
| S4126D | Temperature controllers | STN blue negative, white LED backlight | 48.00 × 64.00 mm | Per drawing, 1/8 duty | 0 to +70 °C | Per drawing |
| S4499D | Temperature controllers | FSTN positive, transflective | 34.60 × 18.70 mm | 3.3 V, 1/4 duty | −40 to +80 °C | Pins |
| S4747D | Digital calipers | FSTN positive, reflective | 42.40 × 20.20 mm | 3.0 V, 1/4 duty | 0 to +50 °C | Zebra |
| S4800D | Instrumentation | DFSTN negative | 68.50 × 15.30 mm | 3.3 V, 1/8 duty | −30 to +80 °C | Pins |
| S3313D | Thermostats | VA negative | 64.0 × 46.0 mm | 5.0 V, 1/4 duty | −20 to +70 °C | Metal pins |
| S2647D | Fuel dispensers | Negative, static drive | 260.9 × 170.2 mm | 3.3 V, static | −20 to +70 °C | Metal pins |
More references are grouped by product on the application pages, for example thermostat LCD displays, meter LCD displays and measuring instrument LCDs. The full list is in the monochrome LCD catalogue.
Choosing the LCD mode
Positive modes (TN, HTN, STN, FSTN) show dark segments on a light background. With a reflective or transflective rear polarizer they can be read by room light alone, as on the caliper, scale and timer references above. Negative modes (DFSTN, VA, negative TN or STN) show bright segments on a dark background and need a backlight. VA gives the deepest black; the VA LCD displays page lists nine VA references. The modes, and how they rank on cost, are compared in monochrome LCD types.
Drive, pins and connection
With static drive each segment has its own pin, so the pin count is the segment count plus one common, and contrast and viewing angle are at their best. Multiplexed drive shares common electrodes: 1/4 duty uses four, 1/8 duty uses eight. That cuts the pin count, and the price is contrast margin. The duty and bias guide explains the trade, and segment LCD pin maps shows how the map is drawn.
For the connection, metal pins solder into the board, a zebra strip is held at about 10 to 15 % compression by the housing, a heat-seal connector is bonded to the glass, and an FPC suits a display some distance from the board. With COG, the driver IC sits on the glass ledge itself.
Worked example: sizing the window for the S4499D
The drawing gives a minimum viewing area of 34.60 × 18.70 mm on a 37.6 × 26.7 mm glass. The window in the housing has to sit between those sizes: at least the minimum viewing area, so no segment or icon is cut off, and inside the glass outline, so the glass edge stays hidden. A 0.5 mm margin on each side gives 34.60 + 1.0 = 35.6 mm by 18.70 + 1.0 = 19.7 mm. Check the result against the window position on the drawing, since the viewing area is not always centred on the glass.
What can be customized
- The artwork: digits, icons, legends, units and their positions.
- Glass outline, LCD mode, viewing direction and polarizers (reflective, transflective or transmissive).
- Drive condition and pin map, matched to your controller.
- Connection: pins, zebra, heat seal, FPC, or COG with the driver on the glass.
- Backlight colour and current, and a wider temperature range where the liquid crystal allows it.
A change to the artwork after tooling means new glass, so freeze the drawing first. What drives the tooling and unit cost is covered in custom LCD display cost, and the development route is on the custom segment LCD page.
What to send with a segment LCD enquiry
- A sketch or drawing of the digits, icons and legends, even a hand drawing.
- The window size and the outline limits in your housing.
- Positive or negative look, and whether the product has a backlight.
- The controller or driver IC, and the duty and voltage it supports.
- Operating temperature range and viewing direction.
- Expected annual quantity and project schedule.
FAQ
What is a segment LCD display?
A segment LCD shows fixed shapes drawn on the glass: digits, icons, units and legends. Each shape is switched on or off by the driver, so the display draws very little power but can only show what was drawn. It is used in meters, thermostats, scales, timers and instruments.
Can SuccessLCD make a segment LCD to my own artwork?
Yes. Send a sketch of the digits and icons with the window size and controller, and the glass is drawn to your layout. A catalogue reference of similar size and mode is useful as a starting point for the drive and connection.
How many pins does a segment LCD need?
It depends on the drive. A display with 64 segments needs 65 pins with static drive, 16 segment lines plus 4 commons (20 pins) at 1/4 duty, and 8 segment lines plus 8 commons (16 pins) at 1/8 duty.
Who holds the quality certificates?
The group factory, Success Electronics Ltd, is certified to IATF 16949:2016, ISO 9001:2015 and ISO 14001:2015. The certificates are issued to the factory, not to the Hong Kong trading company.
Planning a segment LCD? Send a sketch of the digits and icons, the window size, the controller and the temperature range. SuccessLCD will suggest a close reference and draw the glass to your layout, or browse the monochrome LCD catalogue first.
