Measuring Instrument LCD Displays
Handheld and bench instruments—testers, meters, calipers, refractometers and environmental monitors—need sharp digits, unit legends and status icons that stay legible over the full working temperature range. Many also need a bar graph or a second reading on the same glass.
TN, HTN and FSTN positive glass with a transflective polarizer is the common choice where the instrument is read in daylight; VA negative glass is used where it is mostly read with the backlight on. Several references below are rated for −30°C or lower, which is worth checking if your instrument works outdoors.
Related guides: Transflective and reflective LCDs · TN, HTN, STN, FSTN, DFSTN and VA compared · Duty and bias explained · 6 o’clock vs 12 o’clock viewing direction · All LCD product references
Measuring instrument LCD references
The table lists 31 measuring instrument LCD references with full drawing data: 10 TN, 8 FSTN, 7 VA and 6 HTN. LCD operating voltages run from 3.0 V to 9.0 V, and the most common drive is 1/4 duty, 1/3 bias. The widest operating range on these drawings is −40°C to +80°C.
| Model | LCD type | Viewing area | Voltage | Drive | Operating temp. | Connection |
|---|---|---|---|---|---|---|
| S04831D | FSTN, positive | 51.0 × 17.4 mm | 3.0 V | 1/8 duty, 1/3 bias | −35°C to +80°C | Metal pins |
| S2551D | HTN, positive | 72.52 × 33.24 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S2917D | FSTN, positive | 72.0 × 40.0 mm | 9.0 V | 1/65 duty, 1/9 bias | −20°C to +70°C | — |
| S2957-02D | FSTN, positive | 29.0 × 16.35 mm | 9.0 V | 1/64 duty, 1/9 bias | −30°C to +75°C | — |
| S2957D | FSTN, positive | 29.0 × 16.35 mm | 9.0 V | 1/64 duty, 1/9 bias | −30°C to +75°C | — |
| S3705D | VA, negative | 77.0 × 50.0 mm | 5.0 V | 1/8 duty, 1/4 bias | −20°C to +70°C | Metal pins |
| S3733D | VA, negative | 27.43 × 27.43 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4014D | TN, positive | 72.39 × 21.59 mm | 3.6 V | 1/2 duty, 1/2 bias | −20°C to +70°C | Metal pins |
| S4041D | TN, positive | 22.59 × 20.05 mm | 3.3 V | 1/2 duty, 1/2 bias | −20°C to +70°C | Metal pins |
| S4097D | FSTN, positive | 92.0 × 38.0 mm | 3.7 V | 1/4 duty, 1/3 bias | −30°C to +60°C | Metal pins |
| S4120D | VA, negative | 46.8 × 27.8 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4135D | TN, positive | 45.0 × 23.0 mm | 3.3 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Metal pins |
| S4186D | HTN, negative | 50.0 × 46.5 mm | 4.5 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4196D | HTN, negative | 62.6 × 38.9 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4277D | VA, negative | 22.4 × 32.0 mm | 3.3 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4326D | TN, positive | 147.0 × 42.0 mm | 3.3 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Metal pins |
| S4386D | FSTN, positive | 34.6 × 29.6 mm | 3.3 V | 1/4 duty, 1/3 bias | −40°C to +80°C | FPC |
| S4427D | TN, positive | 38.4 × 27.5 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Heat-seal connector |
| S4429D | HTN, positive | 35.0 × 19.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Heat-seal connector |
| S4553D | VA, negative | 105.0 × 60.0 mm | 3.6 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4711D | FSTN, positive | 54.0 × 46.0 mm | 3.0 V | 1/8 duty, 1/4 bias | −20°C to +70°C | Metal pins |
| S4717D | HTN, positive | 66.0 × 40.5 mm | 3.3 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Zebra (elastomer) connector |
| S4718D | HTN, positive | 66.0 × 40.5 mm | 3.3 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Zebra (elastomer) connector |
| S4746D | FSTN, positive | 42.4 × 20.2 mm | 3.0 V | 1/4 duty, 1/2 bias | 0°C to +50°C | Zebra (elastomer) connector |
| S4816D | VA, negative | 60.0 × 60.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +70°C | Metal pins |
| S4840D | TN, positive | 66.0 × 20.0 mm | 3.3 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Metal pins |
| S4843D | TN, positive | 65.6 × 20.58 mm | 3.3 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4844D | VA, negative | 40.0 × 11.8 mm | 3.3 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Metal pins |
| S4856D | TN, positive | 38.0 × 28.0 mm | 3.0 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Zebra (elastomer) connector |
| S4863D | TN, positive | 28.5 × 28.0 mm | 3.3 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Metal pins |
| S4865D | TN, positive | 51.0 × 27.0 mm | 3.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
More measuring instrument references
Real samples on video
Short clips of real SuccessLCD samples for this application. Each player loads when you press play.
More working samples: YouTube playlist · SuccessLCD channel
What to send for a custom measuring instrument LCD
- Your display artwork, or a sketch of the digits, icons and legends you need
- Outline, viewing area and thickness limits from your housing
- LCD operating voltage, or the LCD driver or MCU you plan to use
- Operating and storage temperature
- Connection: metal pins, zebra, FPC or heat seal
- Backlight colour, if any, and the expected annual quantity
Any reference above can be used as a starting point: tell us the model number and what needs to change.



