Zebra contact design
Confirm the glass contact pattern, elastomer connector and compression arrangement with the PCB and housing design.
PRODUCT EXPLORERFront view
Rotate, zoom and inspect the product. Loads on request.
Front rendering of S4745D, showing the display artwork and glass outline. Materials and fine geometry are visual references for the OEM project.
OEM DISPLAY REFERENCE
S4745D
FSTN segment LCD with inch and millimetre legends
S4745D presents a long numeric field, smaller auxiliary digits and in, mm and INC legends. The reference specifies zebra connection and a reflective rear polarizer.
49.00 mmMinimum viewing width
2.7 VLCD operating voltage
A starting point for your custom display.
Images, 3D geometry and listed parameters are OEM reference information. Final dimensions, electrical requirements, optical configuration and construction are confirmed for your project.
Product video
Short product video. Playback starts when you press play.
01 / REFERENCE CONFIGURATION
Start with the essentials.
A reference configuration for discussing your LCD project. Final specifications are subject to project confirmation.
| Model reference | S4745D |
|---|---|
| Rear glass outline | 51.00 ± 0.20 × 19.70 ± 0.20 mm |
| Front glass outline | 51.00 ± 0.20 × 18.50 ± 0.20 mm |
| Minimum viewing width | 49.00 mm |
| Maximum LCD thickness | 2.05 mm max |
| Display mode | FSTN, positive |
| Connection | Zebra connector with glass contacts |
| LCD operating voltage | 2.7 V |
| Drive condition | 1/4 duty, 1/3 bias |
| Frame frequency | 64 Hz |
| Viewing direction | 6 o'clock |
| Rear polarizer | Reflective, adhesive |
| Front polarizer | Transmissive, adhesive |
| Operating temperature | 0 to +50 °C |
| Storage temperature | −10 to +60 °C |
02 / OEM DESIGN
Make the display fit your product.
Bring your requirements. We will review the configuration with you.
Readout layout
Check the main and auxiliary fields against the chosen measurement electronics and display mapping.
Electrical requirements
Confirm your host controller, supply, drive method and backlight requirements before sampling.
03 / APPLICATION DIRECTION
Calipers
An OEM display reference for calipers. The visible units and incremental legend support a caliper-style interface; they do not specify measurement resolution, range or accuracy.
ENGINEERING NOTES
What the specification means for your design.
How S4745D relates to LCD mode, drive, connection and integration choices, with links to the SuccessLCD engineering guides.
FSTN LCD mode
Film-compensated STN: a retardation film gives a near black-on-white look with higher contrast. Compare TN, HTN, STN, FSTN, DFSTN and VA →
Drive: 1/4 duty, 1/3 bias
4 common electrodes share the segment lines. Set the controller to the duty, bias, voltage and frame frequency on the drawing. Duty and bias explained →
Connection: zebra connector
An elastomeric connector presses the glass contacts against PCB pads; the housing or a bracket provides the clamping force. LCD connection types →
Reflective polarizer
Readable by ambient light without a backlight, for the lowest power. Reflective vs transflective LCDs →
Similar FSTN references
04 / PRODUCT SUPPORT
From reference to your design.
Which LCD drive settings are listed for S4745D?
The reference lists 2.7 V LCD operating voltage and 1/4 duty, 1/3 bias, at 64 Hz frame frequency. Check these requirements against your LCD driver; final electrical requirements are confirmed for the project.
Does S4745D define the caliper resolution or accuracy?
No. The artwork provides numeric fields and unit legends. Measurement resolution, range and accuracy depend on the complete caliper design.
YOUR NEXT LCD PROJECT
Let’s shape your display.
Share your required display content, enclosure space, drive arrangement, operating environment and target quantity.
