Automotive LCD Displays: Segment LCD References for Vehicle Electronics

SuccessLCD supplies custom automotive LCD displays for in-vehicle devices, tire pressure gauges, and motorcycle and e-bike meters, starting from segment LCD references such as the S3381D (VA negative, 47.0 × 19.0 mm viewing area, −30 to +88 °C) and the S3418D (TN positive, transflective, −30 to +100 °C). These are segment LCD panels for vehicle electronics, not the large TFT panels used in factory instrument clusters and infotainment. The artwork, backlight, connection and drive are designed around your product.

Request a quote Monochrome LCD catalogue

Operating temperature ranges of ten vehicle segment LCD referencesHorizontal bars on a scale from minus 40 to plus 110 degrees C. S3418D runs from minus 30 to plus 100, S3381D minus 30 to plus 88, S3379D and S3641D minus 30 to plus 85, S3380D, S3382D, S4564D, S4450D and S3766D minus 30 to plus 80, and S3976D minus 20 to plus 70 degrees C.Operating temperature range on each drawing−40 °C−20 °C0 °C+20 °C+40 °C+60 °C+80 °C+100 °CS3418DTN positive−30 to +100 °CS3381DVA negative−30 to +88 °CS3379DVA negative−30 to +85 °CS3641DDFSTN negative−30 to +85 °CS3380DHTN negative−30 to +80 °CS3382DTN negative−30 to +80 °CS4564DTN negative−30 to +80 °CS4450DVA negative−30 to +80 °CS3766DVA negative−30 to +80 °CS3976DHTN positive−20 to +70 °COperating range as stated on each product drawing. Storage range is listed separately on the drawing.
Figure: operating temperature from the drawings of ten references used in vehicle products. Nine of the ten are drawn for −30 °C at the cold end.

Automotive LCD display references

These SuccessLCD references were drawn for products that live in or on a vehicle. Values come from each product drawing.

ReferenceUsed inModeViewing areaVoltage, driveOperating temp.Connection
S3418DIn-vehicle deviceTN positive, transflective58.0 × 37.0 mm5.0 V, 1/4 duty−30 to +100 °CMetal pins
S3381DIn-vehicle deviceVA negative47.0 × 19.0 mm5.0 V, 1/4 duty−30 to +88 °CZebra
S3379DIn-vehicle deviceVA negative45.0 × 25.0 mm5.0 V, 1/4 duty−30 to +85 °CZebra
S3380DIn-vehicle deviceHTN blue negative42.0 × 11.0 mm5.0 V, 1/4 duty−30 to +80 °CZebra
S3382DIn-vehicle deviceTN negative65.0 × 19.0 mm3.0 V, 1/4 duty−30 to +80 °CZebra
S4564DIn-vehicle deviceTN negative41.5 × 51.6 mm5.0 V, 1/4 duty−30 to +80 °CFPC
S3976DIn-vehicle deviceHTN positive, reflective93.0 × 33.4 mm5.0 V, 1/4 duty−20 to +70 °CZebra
S3641DTire pressure gaugeDFSTN negative35.0 × 24.9 mm3.3 V, 1/8 duty−30 to +85 °CFPC
S4450DMotorcycle instrumentVA negative149.0 × 61.0 mm5.0 V, 1/4 duty−30 to +80 °CMetal pins
S3766DE-bike displayVA negative, white LED backlight63.0 × 109.0 mm5.0 V, 1/4 duty−30 to +80 °CMetal pins

More vehicle references are on the motorcycle and e-bike instrument LCD and tire pressure gauge and TPMS LCD pages.

What vehicle use changes in the specification

  • Temperature. The operating range on the drawing is the range the glass is specified for. Nine of the ten references above are drawn for −30 °C at the cold end, and the S3418D reaches +100 °C. Over a wide range the LCD operating voltage shifts; segment LCD duty and bias explains why wide-range products use a driver with temperature compensation or a contrast adjustment.
  • Night reading. Negative modes (VA, DFSTN, negative TN or HTN) show bright segments on a dark background with a backlight. A positive transflective part such as the S3418D can be read with or without the backlight.
  • Viewing direction. The references above use 6 o’clock or 12 o’clock glass, chosen from where the viewer sits relative to the display. See LCD viewing direction.
  • Connection. A zebra strip relies on the housing holding it at about 10 to 15 % compression; metal pins are soldered; an FPC lets the display sit away from the board.

Worked example: pins at 1/4 and 1/8 duty

Take a layout with 96 segments. Static drive needs 96 + 1 = 97 pins. At 1/4 duty it needs 96 ÷ 4 = 24 segment lines plus 4 commons, 28 pins in all. At 1/8 duty it needs 96 ÷ 8 = 12 segment lines plus 8 commons, 20 pins. Most in-vehicle references above use 1/4 duty, 1/3 bias; the S3641D tire pressure display uses 1/8 duty, 1/4 bias. Each step up in duty saves pins and costs contrast margin, which is worth checking on a display that also has to work at −30 °C.

Segment LCD or TFT for a vehicle product

A segment LCD suits fixed readouts: speed, pressure, voltage, warnings and icons, at very low power. A TFT suits maps, menus, camera images and graphics. For TFT options in harsh or bright conditions, see rugged displays, transflective TFT for transportation and automotive HUD TFT technology.

What to send with an automotive LCD enquiry

  • A sketch of the digits, icons and warnings, and the window size.
  • Where the display is mounted and where the viewer sits, for the viewing direction.
  • Operating and storage temperature, and whether the product has a backlight.
  • The controller or driver IC, and the duty and voltage it supports.
  • The connection you prefer and the reliability tests your program requires.
  • Expected annual quantity and project schedule.

The general route for a new glass layout is on the custom segment LCD page, and the cost drivers are in custom LCD display cost.

FAQ

Does SuccessLCD supply custom LCD displays for automotive systems?

Yes, segment LCDs for vehicle electronics such as in-vehicle devices, tire pressure gauges, and motorcycle and e-bike meters. Catalogue references such as the S3381D and S3418D show the modes and temperature ranges already drawn; the glass for your product is drawn to your artwork.

Which LCD mode reads best in a vehicle at night?

A negative mode such as VA or DFSTN with a backlight shows bright segments on a dark background, which suits a dark cabin. A positive transflective mode stays readable in daylight with the backlight off.

Are these displays automotive qualified?

The catalogue drawings state operating and storage temperatures; they do not list an automotive qualification. Write the tests your vehicle program needs into the display specification before samples are built. The group factory, Success Electronics Ltd, is certified to IATF 16949:2016 for the design and manufacture of LCD modules.

Can I get a sample before the custom glass is made?

Start with an evaluation sample of the closest catalogue reference. A new glass layout is built after its drawing is approved, so those samples follow later in the project.

Planning a display for a vehicle product? Send the artwork sketch, window size, mounting position, temperature range and controller. SuccessLCD will suggest a close reference and draw the glass to your layout, or browse the monochrome LCD catalogue first.

Request a quote

Scroll to Top
Get a QuoteWhatsApp