Motorcycle and E-Bike Instrument LCDs
Motorcycle, e-bike, boat and small-vehicle clusters face direct sun, vibration and a wide temperature swing. A typical layout combines a speed reading, gear indicator, odometer and trip fields, fuel or battery bars and a row of warning icons, often on an irregular outline that follows the dashboard.
Positive HTN glass with a transflective polarizer keeps the display readable in sunlight; negative VA or HTN glass with a strong backlight gives the high-contrast look many riders expect at night. Check the operating temperature on each drawing below; most of these references are rated from −20°C or lower.
Related guides: Transflective and reflective LCDs · TN, HTN, STN, FSTN, DFSTN and VA compared · 6 o’clock vs 12 o’clock viewing direction · LCD connection types · All LCD product references
Motorcycle and e-bike instrument LCD references
The table lists 60 motorcycle and e-bike instrument LCD references with full drawing data: 45 HTN, 9 VA, 4 TN and 2 FSTN. LCD operating voltages run from 3.3 V to 5.0 V, and the most common drive is 1/4 duty, 1/3 bias. The widest operating range on these drawings is −30°C to +85°C.
| Model | LCD type | Viewing area | Voltage | Drive | Operating temp. | Connection |
|---|---|---|---|---|---|---|
| S04781D | HTN, positive | 97.0 × 37.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S04864D | HTN (blue), negative | 84.0 × 50.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +70°C | Metal pins |
| S2868D | FSTN, positive | 33.1 × 24.3 mm | 3.3 V | — | −20°C to +70°C | — |
| S3142D | FSTN, positive/negative (both listed on the drawing) | 71.6 × 55.34 mm | 4.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | — |
| S3538D | VA, negative | 50.0 × 30.0 mm | 4.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S3551D | HTN, positive | 47.0 × 38.8 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Zebra (elastomer) connector |
| S3766D | VA, negative | 63.0 × 109.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S3977D | HTN, positive | 79.5 × 59.5 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Zebra (elastomer) connector |
| S4010D | HTN, negative | 115.0 × 42.5 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4137D | HTN, positive | 79.2 × 88.8 mm | 4.5 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Zebra (elastomer) connector |
| S4148D | VA, negative | 99.0 × 49.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4165D | HTN, positive | — | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Zebra (elastomer) connector |
| S4166D | HTN, positive | — | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4184D | HTN, negative | 122.0 × 69.0 mm | 4.5 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4207D | HTN, positive | 54.1 × 35.6 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4217D | HTN, positive | 83.0 × 83.0 mm | 4.8 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4230D | HTN, positive | 149.0 × 60.9 mm | 4.8 V | 1/5 duty, 1/3 bias | −10°C to +60°C | Metal pins |
| S4260D | HTN, positive | 52.8 × 26.8 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4304D | HTN, positive | 31.0 × 18.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Zebra (elastomer) connector |
| S4305D | TN, positive | 30.0 × 18.46 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Zebra (elastomer) connector |
| S4320D | HTN, negative | 38.5 × 19.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | FPC |
| S4321D | HTN, negative | 42.5 × 27.5 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | FPC |
| S4355D | HTN, positive | 58.0 × 31.5 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Heat-seal connector |
| S4356D | HTN, positive | 51.3 × 50.7 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Heat-seal connector |
| S4384D | HTN, negative | 103.0 × 27.5 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4389D | HTN, positive | 133.0 × 49.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Zebra (elastomer) connector |
| S4428D | HTN, positive | 38.5 × 27.5 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Heat-seal connector |
| S4430D | TN, negative | 82.0 × 32.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Heat-seal connector |
| S4431D | HTN, positive | 77.4 × 31.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | FPC |
| S4450D | VA, negative | 149.0 × 61.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4486D | HTN, positive | 97.0 × 35.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4533D | VA, negative | 151.95 × 65.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4570D | HTN, negative | 105.0 × 63.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4606D | HTN, positive | 66.0 × 62.6 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +70°C | Metal pins |
| S4607D | HTN, positive | 66.0 × 62.6 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +70°C | Metal pins |
| S4610D | HTN, positive | 45.0 × 38.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +70°C | Metal pins |
| S4620D | HTN, positive | 64.5 × 34.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4623D | HTN (blue), negative | 117.0 × 65.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4624D | HTN (blue), negative | 91.0 × 48.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4641D | HTN, positive | 54.4 × 35.8 mm | 3.6 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4644D | HTN, positive | 51.0 × 21.5 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | — |
| S4645D | HTN, positive | 67.4 × 41.4 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4669D | HTN, positive | 44.7 × 22.1 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Zebra (elastomer) connector |
| S4673D | HTN, positive | 116.4 × 63.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +70°C | Metal pins |
| S4699D | HTN (blue), negative | 161.5 × 39.8 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +85°C | FPC |
| S4704D | HTN, positive | 37.1 × 54.7 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4712D | HTN (blue), negative | 65.1 × 62.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +70°C | Metal pins |
| S4714D | HTN (blue), negative | 65.1 × 62.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +70°C | Metal pins |
| S4736D | HTN, positive | 54.4 × 28.4 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4737D | HTN, positive | 52.4 × 28.4 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4742D | VA, negative | 116.1 × 62.1 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4749D | HTN, positive | 78.7 × 39.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +70°C | Metal pins |
| S4755D | TN, negative | 65.8 × 46.4 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +70°C | Metal pins |
| S4757D | VA, negative | 116.1 × 62.1 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4758D | HTN, positive | 50.9 × 48.9 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +70°C | Metal pins |
| S4759D | TN, positive | 89.1 × 80.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +70°C | Metal pins |
| S4763D | HTN, positive | 31.0 × 17.9 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4769D | VA, negative | 118.0 × 62.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4789D | VA, negative | 119.0 × 51.6 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | FPC |
| S4809D | HTN (blue), negative | 111.0 × 34.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +70°C | Metal pins |
More motorcycle and e-bike instrument references
- S04778D — Wide HTN instrument display reference
- S04799D — Blue negative HTN display reference
- S04805D — Shaped HTN instrument display reference
- S04830D — HTN LCD
- S2947D — Segment Chip-on-Glass LCD
- S3419D — Compact HTN LCD with gear digit, clock field and fuel bar
- S3675D — Large HTN LCD with speed, clock, odometer and fuel-economy fields
- S3676D — Angled-outline HTN LCD with speed, clock, trip and fuel fields
- S3915D — Irregular-outline HTN LCD with speed, clock and fuel artwork
- S4772D — HTN LCD
Real samples on video
Short clips of real SuccessLCD samples for this application. Each player loads when you press play.
More working samples: YouTube playlist · SuccessLCD channel
What to send for a custom motorcycle and e-bike instrument LCD
- Your display artwork, or a sketch of the digits, icons and legends you need
- Outline, viewing area and thickness limits from your housing
- LCD operating voltage, or the LCD driver or MCU you plan to use
- Operating and storage temperature
- Connection: metal pins, zebra, FPC or heat seal
- Backlight colour, if any, and the expected annual quantity
Any reference above can be used as a starting point: tell us the model number and what needs to change.



