Shaped bezel
Check the sloping edges and mounting clearances against the actual outline. Overall width and height do not define every point of the shaped glass.
PRODUCT EXPLORERFront view
Rotate, zoom and inspect the product. Loads on request.
Front rendering of S04805D, showing the screen artwork and glass outline. Materials and fine geometry are visual references for the OEM project.
OEM DISPLAY REFERENCE
S04805D
Shaped HTN instrument display reference
S04805D is a positive-mode HTN segmented LCD reference with an asymmetric glass outline and sloping upper edges. The artwork combines speed, gear, fuel, temperature, time and distance information above a lower connection row.
2.80 mm maximumLCD thickness
5.0 VLCD operating voltage
A starting point for your custom display.
Images, 3D geometry and listed parameters are OEM reference information. Final dimensions, electrical requirements, optical configuration and construction are confirmed for your project.
Product video
Short product video. Playback starts when you press play.
01 / REFERENCE CONFIGURATION
Start with the essentials.
A reference configuration for discussing your LCD project. Final specifications are subject to project confirmation.
| Model reference | S04805D |
|---|---|
| Display mode | HTN, positive |
| Rear glass width × height | 92.00 ± 0.20 × 58.00 ± 0.20 mm |
| Front glass width × height | 92.00 ± 0.20 × 55.50 ± 0.20 mm |
| LCD thickness | 2.80 mm maximum |
| Glass thickness per layer | 1.10 ± 0.10 mm |
| Connection | 36 pins along the lower edge |
| Pin pitch | 2.00 mm |
| LCD operating voltage | 5.0 V |
| Drive condition | 1/4 duty, 1/3 bias |
| Frame frequency | 64 Hz |
| Viewing direction | 6 o’clock |
| Front and rear polarizers | Transmissive, adhesive |
| Operating temperature | −30 °C to +70 °C |
| Storage temperature | −40 °C to +80 °C |
02 / OEM DESIGN
Make the display fit your product.
Bring your requirements. We will review the configuration with you.
Connection and mounting
Position the lower pin row, PCB and supports together. Confirm the final pin shape and COM/SEG assignment before committing the assembly.
Riding information
Agree on the gear, speed, distance and warning segments required by the host electronics, including the selected units and illumination.
03 / APPLICATION DIRECTION
Motorcycle instruments
Use the shaped outline to review a motorcycle instrument bezel and its display opening. Select the required riding information and warning states, then confirm the complete instrument’s visibility, signal processing and operating conditions.
04 / PRODUCT SUPPORT
From reference to your design.
Can a rectangular opening be defined from the overall dimensions?
The dimensions describe the glass envelope. The sloping edges and visible opening need the exact agreed outline.
Are the displayed vehicle readings built-in measurements?
No. They are segments and symbols driven by host electronics. Sensors, processing and vehicle validation are separate.
YOUR NEXT LCD PROJECT
Let’s shape your display.
Share your required display content, enclosure space, drive arrangement, operating environment and target quantity.
