HMI Displays and Touch Screens: TFT Modules for OEM Control Panels

SuccessLCD supplies HMI display modules for OEM control panels, starting from catalogue TFT references such as the S700MI2XE-02 (7-inch, 1024 × 600, 24-bit RGB) and the S10MB1XH-07C0 (10.1-inch, 1024 × 600, LVDS, capacitive touch). These are the display and touch assemblies that sit behind your front panel, not finished HMI terminals with their own processor and software. The TFT cell comes from an existing reference; the backlight, FPC, touch panel, cover lens and bonding are adapted to the machine.

Request a quote Touch panel and cover lens options

Outlines of five HMI display references drawn to the same scaleFive nested rectangles compare HMI display module outlines at the same scale: 4.3-inch S430MBWS-01 at 105.5 by 67.2 mm, 7-inch S700MI2XE-02 at 164.8 by 99.8 mm, 10.1-inch S10MB1XH-07C0 at 235 by 143 mm, 12.1-inch S10MHYH-02 at 277.7 by 180.6 mm and 15.6-inch S60MZJW-01 at 350.7 by 205.27 mm.HMI display references, module outlines to scale15.6 in · S60MZJW-01350.7 × 205.27 mm12.1 in · S10MHYH-02277.7 × 180.6 mm10.1 in · S10MB1XH-07C0235 × 143 mm7 in · S700MI2XE-02164.8 × 99.8 mm4.3 in · S430MBWS-01105.5 × 67.2 mmOutlines are reference values from the catalogue. Confirm the drawing for your project.
Figure: five of the HMI display references at one scale, from the 4.3-inch S430MBWS-01 to the 15.6-inch S60MZJW-01. The 5-inch parts sit between the two smallest outlines.

HMI display references

These SuccessLCD references cover the sizes most control panels use. Each row links to its product page; values marked per project come from the datasheet of the quoted revision.

ReferenceSizeResolutionInterfaceTouchOutline (reference)
S430MINS-024.3 in480 × 272RGBNot fitted105.5 × 67.2 mm
S430MBWS-014.3 in800 × 480RGBNot fitted105.5 × 67.2 mm
STFT43-02D4.3 in480 × 272RGBCapacitivePer project
S500MIWI-045 in800 × 480RGBNot fitted120.7 × 75.8 mm
S700MIWN-18-W7 in800 × 480RGBNot fitted164.8 × 99.8 mm
S700MI2XE-027 in1024 × 600RGB, 24-bitNot fitted164.8 × 99.8 mm
S700MB1XH-097 in1024 × 600LVDSNot fitted164.8 × 99.8 mm
S10MB1XH-07C010.1 in1024 × 600LVDSCapacitive235 × 143 mm
S10MHYH-0212.1 in1280 × 800LVDSPer project277.7 × 180.6 mm
S60MZJW-0115.6 in1920 × 1080eDPNot fitted350.7 × 205.27 mm

Smaller panels for compact controls are on the RGB interface TFT modules and SPI display modules pages, and the full range is in the TFT LCD module catalogue.

Picking the size and interface for an HMI display

  • Size follows the operator task. Status values and a few keys fit on 4.3 or 5 inches. Trend charts, alarm lists and an on-screen keyboard are easier at 7 inches or more.
  • Interface follows the host and the cable. Parallel RGB suits a controller board mounted directly behind the display. When the display sits in a door or lid, a cable length away, LVDS carries the same image on a few differential pairs with far lower emissions.
  • Readability is decided by the whole front stack: backlight brightness, surface reflection, cover lens and bonding. See high-brightness TFT LCD modules and optical bonding vs air gap.

Worked example: text size and panel opening on the 7-inch S700MI2XE-02

The drawing gives an active area of 154.21 × 85.92 mm for 1024 × 600 pixels, so the pixel pitch is 154.21 ÷ 1024 = 0.1506 mm across and 85.92 ÷ 600 = 0.1432 mm down. A value drawn 40 pixels tall is 40 × 0.1432 = 5.7 mm high on the glass, and a key 60 pixels wide is 60 × 0.1506 = 9.0 mm. The bezel opening is 156.70 × 89.10 mm. If it is centred on the active area, that leaves (156.70 − 154.21) ÷ 2 = 1.2 mm at each side and (89.10 − 85.92) ÷ 2 = 1.6 mm top and bottom, inside a 164.8 × 99.8 mm body.

The longer selection method, with the checks to run on a sample, is in how to choose a TFT LCD module for industrial HMI projects.

HMI touch screen: capacitive or resistive

Projected capacitive touch works through a glass cover, so the front can be flat, sealed and easy to wipe, with multi-touch gestures. Gloves, water and thick covers change its behaviour, and the controller is tuned with the final lens. Resistive touch responds to pressure, so any glove or stylus works, at the cost of a softer top film. At 4.3 inches the catalogue has both: the capacitive STFT43-02D and the resistive STFT43D. To add touch to a display that has none, the S700GG-42 and S10GF2-94 are standalone capacitive panels in the 7-inch and 10-inch classes. More touch references are on the custom touch screen displays page.

What can change, and what stays fixed

Around the TFT cell, most of the module can be adapted to the panel it goes into:

  • Backlight brightness, by changing the LED count, LED current or optical films.
  • FPC length, shape, connector and pin order.
  • Touch panel, cover lens outline, thickness, printing and coatings, and optical bonding.
  • Mechanics: a metal frame, mounting ears, adhesive tape or gaskets.

The cell size and resolution are fixed by the panel fab, and the viewing angle is tied to the cell. The operating temperature range is mostly set by the cell’s liquid crystal and polarizers. The interface is set by the driver IC; a bridge chip can convert it when the host needs something else. Details are in what can be customized on a TFT module.

What to send with an HMI display enquiry

  • What the operator reads and presses, and the viewing distance.
  • The panel opening, or the closest reference from the table above.
  • The host processor or controller board and the display interface it drives.
  • Brightness and the light the panel works in.
  • Touch type, gloves or wet use, the cover lens drawing and bonding.
  • Operating and storage temperature.
  • Expected annual quantity, schedule and how many years the equipment stays in production.

A fuller checklist is in what to include in a TFT LCD module RFQ.

FAQ

What is an HMI display?

HMI stands for human-machine interface. The HMI display is the screen an operator uses to read values and control a machine, usually a TFT module with a touch panel and cover lens behind the front plate. SuccessLCD supplies that display assembly to OEMs who design their own control electronics.

Is an HMI display module the same as an HMI panel?

Not quite. An HMI panel or terminal is a finished unit with its own processor and software. An HMI display module is the screen inside it: the TFT, backlight and FPC, with touch and cover lens where needed. The references on this page are display modules.

Can I get a sample before the custom parts are ready?

Start with an evaluation sample of the closest catalogue reference. New parts such as a printed cover lens or a changed FPC are built after their drawing is approved, so those samples follow later in the project.

Which HMI touch screen sizes does SuccessLCD list?

With touch fitted, the catalogue lists the 4.3-inch STFT43-02D (480 × 272, RGB, capacitive), the resistive STFT43D at the same size and the 10.1-inch S10MB1XH-07C0 (1024 × 600, LVDS, capacitive). For the 7-inch and 10-inch classes, the standalone S700GG-42 and S10GF2-94 capacitive panels can be added to a display without touch.

Who holds the quality certificates?

The group factory, Success Electronics Ltd, is certified to IATF 16949:2016, ISO 9001:2015 and ISO 14001:2015. The certificates are issued to the factory, not to the Hong Kong trading company.

Planning an HMI display? Send the panel opening, the host board, the interface, and the brightness and touch conditions. SuccessLCD will match a catalogue reference and list what has to change, or browse the TFT LCD module catalogue first.

Request a quote

Scroll to Top
Get a QuoteWhatsApp