Industrial Touch Screen Displays for OEM Equipment

SuccessLCD supplies industrial touch screen displays as TFT modules with the touch panel already fitted, starting from catalogue references such as the S10MB1XH-07C0 (10.1-inch, 1024 × 600, LVDS, capacitive touch) and the STFT50-01D (5-inch, 800 × 480, MIPI + RGB, capacitive touch). These are display and touch assemblies for building into your own equipment, not finished panel PCs or monitors. The display cell comes from an existing reference; the cover lens, touch tuning, FPC and bonding are adapted to the machine.

Request a quote Touch panel and cover lens options

Industrial touch screen display references

Each row is a SuccessLCD catalogue reference and links to its product page. Seven are TFT modules with touch fitted; the last three are standalone capacitive panels for a display you already have.

ReferenceSizeResolutionDisplay interfaceTouchOutline (reference)
S350MLQZ, resistive touch3.5-inch320 × 240SPI + RGBResistive76.9 × 63.9 mm
STFT397D3.97-inch480 × 800MIPICapacitiveConfirm for your project
STFT50-01D5-inch800 × 480MIPI + RGBCapacitiveConfirm for your project
S700MIWE-28C07-inchConfirm with drawingConfirm with drawingCapacitive164.9 × 100 mm
STFT80D8-inchConfirm with drawingProject-specificCapacitiveConfirm for your project
S10MB1XH-07C010.1-inch1024 × 600LVDSCapacitive235 × 143 mm
STFT1010D10.1-inch800 × 1280MIPICapacitiveConfirm for your project
S700GG-427-inch touch panelTouch onlyTouch over I²C (GT911)Capacitive, standalone164.4 × 99.5 mm
S700GF2-057-inch touch panelTouch onlyConfirm with drawingCapacitive, standalone164.4 × 99.5 mm
S10GF2-9410-inch touch panelTouch onlyTouch over I²C (FT5426G)Capacitive, standalone247 × 152 mm

Outlines are reference values. Brightness, operating temperature, connector and pin assignment are confirmed against the drawing of the revision you are quoted.

Capacitive or resistive on industrial equipment

Projected capacitive touch sits behind a glass cover lens, so the front can be a flat, sealed surface, and it supports multi-touch. It senses a finger through the lens, which means gloves, water on the surface and a thick lens all have to be allowed for when the controller is tuned.

Resistive touch responds to pressure. It works with any glove or a stylus and ignores water drops, but the front is a flexible film instead of glass and it reads one point at a time. The S350MLQZ resistive variant is the catalogue reference for that case. The trade-offs are covered in capacitive vs resistive touch screens and capacitive touch with gloves, water and thick glass.

What can change, and what stays fixed

Around the display cell, most of the front stack is open to change: the cover lens outline, thickness, holes, printed border and logo, and an AG, AR or AF surface; the touch tuning for the final lens thickness, gloves or water; an air gap with frame tape or optical bonding; and the FPC length, exit side, connector and pin order.

The TFT cell is made in fixed sizes, so its diagonal, resolution and display interface are chosen from existing cells. The full list is in what can be customized on a TFT module.

Check the key size before you pick the panel

Worked example: a 15 mm key. Suppose your interface rule is a 15 mm key for gloved operators. That figure is only an example; use whatever your own HMI standard requires. On the S10MB1XH-07C0, 1024 × 600 pixels on a 10.1-inch diagonal is about 117 pixels per inch, a pitch of about 0.216 mm, so the key is roughly 69 pixels wide and 14 fit across the screen. On the 3.5-inch S350MLQZ, 320 × 240 is about 114 pixels per inch, so the same key is about 68 pixels and only 4 fit across.

Pixel density is nearly the same on both. What changes with size is how many controls fit on one screen. These figures use the nominal diagonal, so take the active area from the drawing before fixing a layout.

What to send with an industrial touch screen enquiry

  • The host processor or board and the display interface it provides: RGB, LVDS or MIPI.
  • The window size or the outline the display must fit, and the enclosure depth.
  • The touch type, and whether operators wear gloves or the screen sees water or cleaning agents.
  • Cover lens thickness, printing and surface treatment, and whether the stack is bonded.
  • Operating and storage temperature, and the brightest light that falls on the screen.
  • The expected production life of the equipment.

FAQ

Which industrial touch screen sizes does SuccessLCD list?

The catalogue lists TFT references with touch fitted at 3.5, 3.97, 5, 7, 8 and 10.1 inches, for example the STFT50-01D (5-inch, 800 × 480, MIPI + RGB) and the S10MB1XH-07C0 (10.1-inch, 1024 × 600, LVDS). Standalone capacitive panels are listed at 7 and 10 inches.

Will a capacitive industrial touch screen work with gloves or water?

It depends on how the controller is tuned for the final cover lens. Give the glove type, the water exposure and the lens thickness with the enquiry so this is settled at the sample stage. Where any glove or a stylus must work, a resistive reference such as the S350MLQZ touch variant is the alternative.

Can you supply only the touch panel for a display we already use?

Often, yes. The S700GG-42 (7-inch, GT911 controller, I²C) and the S10GF2-94 (10-inch, FT5426G controller, I²C) are standalone capacitive panels. The outline, viewing area, connector and mounting still have to be checked against your display.

Where can I source glove-compatible PCAP touch with optical bonding for an industrial TFT display?

SuccessLCD supplies industrial TFT modules with PCAP touch fitted, such as the S10MB1XH-07C0 (10.1-inch, 1024 × 600, LVDS) and the 7-inch S700MIWE-28C0. The touch is tuned for gloves on the final cover glass, and the stack is built with an air gap or optical bonding per project. Send the glove type, glass thickness and lighting, and we will propose the reference and the stack.

Who holds the quality certificates?

The group factory, Success Electronics Ltd, is certified to IATF 16949:2016, ISO 9001:2015 and ISO 14001:2015. The certificates are issued to the factory, not to the Hong Kong trading company.

Planning an industrial touch screen? Send the host interface, window size, touch type and environment, and SuccessLCD will match the closest reference. You can also browse the TFT LCD module catalogue first.

Request a quote

Scroll to Top
Get a QuoteWhatsApp