Custom LVDS Display Modules: 5 to 12.8 Inch TFT References for OEM Products

SuccessLCD supplies LVDS display modules as OEM references from 5 to 12.8 inches, in resolutions from 800 × 480 to 1920 × 1080. Each one starts from a standard TFT cell, and the parts around it are adapted to the product: the backlight, the FPC or cable, the touch panel, the cover lens and the bonding. This page lists the references, what to confirm about the LVDS link, and what to send with an enquiry.

Request a quote TFT LCD catalogue

Outlines of six LVDS display references drawn to the same scaleSix nested rectangles compare LVDS display module outlines at the same scale: 5-inch S500MHWS2-01 at 120.7 by 75.8 mm, 7-inch S700MB1XH-09 at 164.8 by 99.8 mm, 8-inch S800MEKH-01 at 192.8 by 116.9 mm, 10.1-inch S10MB1XH-07C0 at 235 by 143 mm, 12.1-inch S10MHYH-02 at 277.7 by 180.6 mm and 12.8-inch S80MHJH-04-W at 294.4 by 175 mm.LVDS display references, module outlines to scale12.8 in · S80MHJH-04-W294.4 × 175 mm12.1 in · S10MHYH-02277.7 × 180.6 mm10.1 in · S10MB1XH-07C0235 × 143 mm8 in · S800MEKH-01192.8 × 116.9 mm7 in · S700MB1XH-09164.8 × 99.8 mm5 in · S500MHWS2-01120.7 × 75.8 mmOutlines are reference values from the catalogue. Confirm the drawing for your project.
Figure: the six LVDS references at one scale. The 12.1-inch part is taller than the 12.8-inch part because its panel is 16:10.

LVDS display references

ReferenceSizeResolutionTouchOutline (reference)
S500MHWS2-015 in800 × 480Not fitted120.7 × 75.8 mm
S700MB1XH-097 in1024 × 600Not fitted164.8 × 99.8 mm
S800MEKH-018 inConfirmed for the projectConfirmed for the project192.8 × 116.9 mm
S10MB1XH-07C010.1 in1024 × 600Capacitive235 × 143 mm
S10MHYH-0212.1 in1280 × 800Confirmed for the project277.7 × 180.6 mm
S80MHJH-04-W12.8 in1920 × 1080Confirmed for the project294.4 × 175 mm

These are starting points. If your window or resolution falls between two of them, tell us the opening and we will check which standard cells fit. The full range is in the TFT LCD module catalogue.

What to confirm on an LVDS display before design freeze

  • Colour depth and pair count. An 18-bit panel uses 3 data pairs and a clock pair. A 24-bit panel uses 4 data pairs and a clock pair.
  • Data mapping. JEIDA and VESA place the colour bits on different pairs, and the host must match the panel.
  • Channel count. Formats with a high pixel clock, such as 1920 × 1080, are commonly split over two LVDS channels.
  • Timing. Take the pixel clock range and blanking from the panel datasheet, not from a similar panel.
  • Connector, pin assignment and cable length, including whether power and backlight share the connector.
  • Backlight drive. Check whether the LED driver is on the module or has to be on your board.

The layout numbers, cable rules and EMI checks are in LVDS TFT LCD EMI and signal integrity.

What can be customized

The TFT cell is fixed by the panel fab. The module around it is what changes:

What each change involves is explained in what can be customized on a TFT module, and the general route is on the custom TFT display page.

When another interface fits better

LVDS suits equipment where the display sits a cable length away from a processor board. If the host has no LVDS output, compare the cost of a bridge chip with choosing a panel that matches the host: a MIPI display for application processors with DSI, or an SPI display for microcontrollers. The trade-offs are in interface options for an OEM TFT module.

What to send with an LVDS display enquiry

  • The host processor or bridge chip, and its LVDS output format.
  • The window size and the outline limits in your enclosure.
  • Resolution, brightness and where the product is used.
  • Touch, cover lens and bonding needs.
  • Operating temperature range.
  • Expected annual quantity and project schedule.

A fuller list is in what to include in a TFT LCD module RFQ.

FAQ

What sizes of LVDS display does SuccessLCD offer?

The catalogue references are 5, 7, 8, 10.1, 12.1 and 12.8 inches, from 800 × 480 to 1920 × 1080. The 10.1-inch S10MB1XH-07C0 includes capacitive touch. Other sizes depend on which standard TFT cells are available, so send the window size you need.

Can an LVDS display be customized?

Yes, around the TFT cell. The backlight, the FPC or cable, the touch panel, the cover lens and optical bonding can be adapted. The cell size and resolution come from the panel fab and are chosen from existing parts.

What do I need to drive an LVDS display?

A host or bridge chip with an LVDS output that matches the panel in colour depth, pair count and data mapping. An 18-bit panel uses 3 data pairs and a clock pair, and a 24-bit panel uses 4 plus the clock.

Need an LVDS display for your product? Send the host, the window size, the resolution, and the brightness and touch you need. We will match a reference and list what has to change. Send an LVDS display enquiry, or browse the TFT LCD module catalogue.

Scroll to Top
Get a QuoteWhatsApp