Kiosk and POS Touch Displays: 4.3 to 15.6 Inch TFT Modules for Self-Service Terminals

Self-service kiosks, POS terminals and payment devices put a touch display in front of the public all day, often with the same screen showing for hours. What separates a good kiosk display from a bad one is rarely the panel: it is the cover glass, the touch tuning, how the backlight copes with a warm enclosure, and whether the UI avoids leaving a ghost image. We supply TFT modules from 4.3 to 15.6 inches with capacitive touch and custom cover glass for these terminals, on OEM terms from 1,000 pieces. Large-format signage screens above 15.6 inches are outside our range.

Request a quote Touch panel and cover lens options

Which display fits which terminal

TerminalDisplay that fitsCatalogue references
Payment terminal, customer-facing display4.3 to 5 in TFT with capacitive touchSTFT43-02D (4.3 in, 480 × 272, RGB, capacitive), STFT50-01D (5 in, 800 × 480, MIPI + RGB, capacitive)
Countertop POS, table ordering, queue terminal7 to 10.1 in with PCAP touch, landscape or portraitS700MIWE-28C0 (7 in touch assembly), S10MB1XH-07C0 (10.1 in, 1024 × 600, LVDS, capacitive), STFT1010D (10.1 in, 800 × 1280 portrait, MIPI, capacitive)
Ticket machine, locker, check-in or vending kiosk12.1 to 15.6 in, LVDS or eDP, PCAP behind a thick coverS10MHYH-02 (12.1 in, 1280 × 800, LVDS), S80MHJH-04-W (12.8 in, 1920 × 1080, LVDS), S60MZJW-01 (15.6 in, 1920 × 1080, eDP)
Standalone touch panel for your own LCDProjected capacitive panelS700GG-42 (7 in PCAP), S10GF2-94 (10 in PCAP)

Picking the size from the UI, not the other way round

Work out how big your buttons need to be, then check how many pixels that is on the panel. Take the 15.6 inch, 1920 × 1080 reference. Its diagonal is 396.2 mm, so at 16:9 the active width is 396.2 × 16 ÷ 18.36 ≈ 345 mm, and the pixel pitch is 345 ÷ 1920 ≈ 0.18 mm. If your UI style guide asks for 10 mm touch targets, each one is about 56 pixels wide on this panel. On a 10.1 inch, 1024 × 600 panel the pitch is about 0.22 mm, so the same button is about 46 pixels. Our screen size and PPI calculator does this for any size.

Mounting height matters as much for public terminals. In the US, the ADA Standards put operable parts for a forward reach between 15 and 48 inches above the floor. A kiosk screen that people must touch has to sit inside that band; one that only shows information can go higher.

All day, every day: image retention and backlight life

A kiosk often shows the same home screen for hours. Liquid crystal held at one state for that long can leave a faint ghost image, which normally fades once the content changes. Keep static logos small, add a slow shift or an attract loop when the terminal is idle, and avoid pure white backgrounds held for hours. The causes and fixes are in TFT LCD image retention and can LCD screens burn in.

The backlight is the part that wears out. LED lifetime figures are quoted at a stated current and temperature, usually as the hours until luminance falls to half. A kiosk enclosure with a PC inside can run well above room temperature, which shortens that life. Ask for the lifetime conditions, keep the backlight dimmed when nobody is at the terminal, and give the display a heat path. The LCD backlight guide explains the numbers.

Cover glass and touch for public use

Public touch screens get fingerprints, cleaning sprays and the occasional knock. A projected capacitive sensor behind tempered cover glass handles all three better than a resistive film. On the cover glass you can specify:

  • Thickness and strengthening, chosen with the touch controller in mind, because thicker glass weakens the touch signal.
  • Anti-glare or anti-reflective treatment for bright stores and lobbies, and an anti-fingerprint coating so cleaning is easier. See anti-glare vs anti-reflective cover glass.
  • Printed border, logo and icons on the back of the glass, so the terminal front is a single flat surface.
  • Bonding if the terminal faces windows or the outdoors, to cut reflections and stop fogging.

Outdoor kiosks need more: higher brightness, an IK impact rating for the front and an IP seal. The EV charger display page works through the same questions for a public outdoor terminal, and waterproof touch screen displays covers sealing. Touch panels and cover glass options are on touch panels and cover lens.

Connecting to the terminal’s computer

Kiosk and POS boards usually drive the panel over LVDS or eDP, and some only offer HDMI. LVDS suits 7 to 12.8 inch panels and cable runs inside a cabinet; eDP is the common choice at 15.6 inches and 1080p. If the board only has HDMI, a converter board between the two is the usual answer. Our page on which interface to require on an OEM TFT compares the options, and custom LVDS display modules lists the LVDS references.

Quantities and what to send

We work on OEM terms: production orders start at 1,000 pieces, and evaluation samples are arranged per project. The group factory that builds our modules holds IATF 16949, ISO 9001 and ISO 14001 certificates. To quote a kiosk or POS display, send the size and orientation, the board’s display output, indoor or outdoor use, the cover glass you want (thickness, treatment, printing) and the expected yearly volume.

Kiosk and POS display FAQs

What size touch display do kiosks and POS terminals use?

Payment terminals use about 4.3 to 5 inches, countertop POS and ordering terminals 7 to 10.1 inches, and ticket machines and check-in kiosks 12 to 15.6 inches. Our TFT range runs from 1.3 to 15.6 inches.

Will a kiosk display get burn-in from a static screen?

An LCD can show temporary image retention after holding one image for hours, which usually fades when the content changes. Shifting the idle screen and avoiding long static white areas prevents it.

Capacitive or resistive touch for a public kiosk?

Projected capacitive touch behind tempered cover glass is the usual choice: it is easier to clean, survives knocks better and supports multi-touch. Resistive touch suits terminals used with thick gloves or a stylus.

What is the minimum order for a kiosk display?

Production orders start at 1,000 pieces. Evaluation samples are arranged per project before an order is placed.

Building a kiosk or POS terminal? Send the size, orientation, board output and cover glass you have in mind, and we will propose a display and touch stack. Ask about a kiosk display.

Scroll to Top
Get a QuoteWhatsApp