IPS TFT Displays for OEM Products: 3.5 to 7 Inch Modules

SuccessLCD supplies IPS TFT displays from 3.5 to 7 inches for OEM products, starting from catalogue references such as the S430MBWS-01 (4.3-inch, 800 × 480, RGB, 80° viewing angle in every direction) and the S700MB1XH-09 (7-inch, 1024 × 600, LVDS, 85° in every direction, 1000 cd/m² typical). An IPS panel keeps its colour and contrast when the screen is read from the side, from above or from below, which matters on wall panels, carts and machines that several people look at. The panel and resolution come from an existing reference; the backlight, FPC, cover glass and touch are adapted to your product.

Request a quote TFT LCD catalogue

Viewing angles of a TN and an IPS 4.3-inch TFTTwo pairs of fans. Left, TN reference S430MI2NI: 70 degrees left and right, 50 and 60 degrees in the two vertical directions, best viewed from 12 o clock. Right, IPS reference S430MBWS-01: 80 degrees in all four directions.TN reference (S430MI2NI)70° left · 70° right50° and 60° verticalBest viewed from one direction (12 o’clock)IPS reference (S430MBWS-01)80° left · 80° right80° up · 80° downSame picture from every sideViewing angle at contrast ratio ≥ 10, typical values from the two 4.3-inch drawings.
Figure: viewing angles of two 4.3-inch catalogue references. The TN panel has a preferred direction; the IPS panel looks the same from every side.

IPS TFT display references

All seven references below use an IPS panel. Viewing angles are typical values at a contrast ratio of 10 or more, taken from the drawing or datasheet of each model.

ReferenceSizeResolutionInterfaceViewing angleLuminance (typical)Touch
STFT35-02D3.5 in320 × 240RGB + SPIConfirm with datasheetConfirm with datasheetNot listed
S35001D3.5 in320 × 24024-bit RGB + SPIAll directions850 cd/m²G+G capacitive
S430MBWS-014.3 in800 × 480RGB80° each way500 cd/m²None fitted
S500MHZI-015 in480 × 854SPI + RGB80° each way500 cd/m²None fitted
S500MI4WS2-03F15 in800 × 48024-bit RGBAll directions450 cd/m²G+G capacitive
S700MB1XH-097 in1024 × 600LVDS85° each way1000 cd/m²None fitted
S700MI2XE-027 in1024 × 60024-bit RGBAll directions400 cd/m²None fitted

There is no 10.1-inch IPS reference in the catalogue yet. Brightness, temperature range and connector are confirmed against the drawing of the revision you are quoted.

IPS or TN: what the viewing angle buys

IPS and TN are both TFT panels; the names describe how the liquid crystal switches, not a different kind of display. A TN panel has a preferred viewing direction. The 4.3-inch TN reference S430MI2NI, for example, is specified for 12 o’clock viewing, with 70° to the left and right and 50° and 60° in the two vertical directions. Beyond those angles the contrast falls and grey levels can invert. The IPS reference S430MBWS-01, the same size, lists 80° in all four directions and no preferred side. The longer comparison is in IPS vs TFT and TN vs IPS LCD displays.

A TN panel is still a sound choice when one person reads the screen from a fixed position, such as an instrument at eye level. Choose IPS when the screen is read from several positions, mounted well above or below eye level, or when colours have to look the same to everyone.

Worked example: does a low-mounted panel need IPS? Take a display on a cart with its centre 0.9 m above the floor and an operator whose eyes are at 1.65 m, standing 0.6 m in front. If the panel faces straight out, the line of sight drops 1.65 − 0.9 = 0.75 m over 0.6 m, and atan(0.75 ÷ 0.6) ≈ 51° off the panel normal. That is past the 50° listed in one vertical direction for the TN reference, and well inside the 80° of the IPS references. Tilting the panel back by 20° brings the angle to about 31°, which also suits a TN panel if everyone stands in roughly the same place.

What can change, and what stays fixed

The IPS cell fixes the size, resolution and panel interface, so those are chosen from the references above. Around it, the backlight brightness, FPC length and exit, cover glass, touch panel and bonding are adapted per project, as described in what can be customized on a TFT module. For products used outdoors, pair the IPS panel with a brighter backlight or optical bonding; see sunlight readable displays.

The interface follows the host processor. The 3.5-inch, 4.3-inch and 5-inch references and the S700MI2XE-02 use parallel RGB, some with SPI for initialization, which suits microcontrollers with an LCD controller; see RGB interface TFT modules. The S700MB1XH-09 uses LVDS, which suits application processors and longer cable runs; see LVDS TFT modules.

What to send with an IPS TFT enquiry

ItemWhy it matters
Host processor and its display outputDecides RGB or LVDS, and so the reference
Where viewers stand and how the panel is mountedConfirms IPS is needed and how far to tilt the panel
Ambient light: indoors, near a window, outdoorsBacklight level, surface treatment and bonding
Touch type, cover glass and window sizeDefines the touch panel and lens
Operating temperatureFive of the references list −20 to +70 °C; S500MI4WS2-03F1 lists −30 to +70 °C
Yearly volume and product lifeSupply planning

IPS TFT display FAQs

What is an IPS TFT display?

It is a TFT LCD whose liquid crystal switches in the plane of the panel, which is what IPS (in-plane switching) means. The result is a wide, even viewing angle: the IPS references from SuccessLCD list 80° to 85° in all four directions, where a TN panel has a preferred viewing direction.

Which IPS TFT display sizes does SuccessLCD supply?

From 3.5 to 7 inches: STFT35-02D and S35001D at 3.5 inches, S430MBWS-01 at 4.3 inches (800 × 480), S500MHZI-01 and S500MI4WS2-03F1 at 5 inches, and S700MB1XH-09 (LVDS) and S700MI2XE-02 (RGB) at 7 inches with 1024 × 600.

Is IPS better than TN for a TFT display?

For screens read from several angles, yes, because colour and contrast stay even. For one user at a fixed angle a TN panel can do the job; check its preferred viewing direction against how the product is mounted.

Who holds the quality certificates?

The group factory, Success Electronics Ltd, is certified to IATF 16949:2016, ISO 9001:2015 and ISO 14001:2015. The certificates are issued to the factory, not to the Hong Kong trading company.

Planning an IPS display? Send the host processor, the size, where people view the screen from and the touch you need. SuccessLCD will match the IPS reference and say what to adapt. Browse the TFT LCD module catalogue, or ask about an IPS TFT display.

Scroll to Top
Get a QuoteWhatsApp