Compact opening
Check the 57.00 × 27.00 mm minimum viewing area and the 60.00 × 32.50 mm rear glass outline against the panel opening.
PRODUCT EXPLORERFront view
Rotate, zoom and inspect the product. Loads on request.
Front rendering of S3650D, showing the display artwork and glass outline. Materials and fine geometry are visual references for the OEM project.
OEM DISPLAY REFERENCE
S3650D
HTN fuel display with a level bar and trip digits
S3650D is an HTN, positive-mode segmented LCD reference with an E–F fuel bar above a six-digit numeric field. Fuel-pump, TRIP, ODO, km and mile legends identify the display areas. A pin row runs along the lower edge.
57.00 × 27.00 mmMinimum viewing area
4.5 VLCD operating voltage
A starting point for your custom display.
Images, 3D geometry and listed parameters are OEM reference information. Final dimensions, electrical requirements, optical configuration and construction are confirmed for your project.
Product video
Short product video. Playback starts when you press play.
01 / REFERENCE CONFIGURATION
Start with the essentials.
A reference configuration for discussing your LCD project. Final specifications are subject to project confirmation.
| Model reference | S3650D |
|---|---|
| Rear glass width × height | 60.00 ± 0.20 × 32.50 ± 0.20 mm |
| Front glass width × height | 60.00 ± 0.20 × 30.00 ± 0.20 mm |
| Minimum viewing area | 57.00 × 27.00 mm |
| LCD thickness | 3.00 mm maximum |
| Glass thickness per layer | 1.10 ± 0.10 mm |
| Pin pitch | 2.00 mm |
| Display mode | HTN, positive |
| Connection | Pins |
| LCD operating voltage | 4.5 V |
| Drive condition | 1/4 duty, 1/3 bias |
| Frame frequency | 75 Hz |
| Viewing direction | 6 o’clock |
| Rear polarizer | Transflective, adhesive |
| Front polarizer | Transmissive, adhesive |
| Operating temperature | −20 °C to +70 °C |
| Storage temperature | −30 °C to +80 °C |
02 / OEM DESIGN
Make the display fit your product.
Bring your requirements. We will review the configuration with you.
Lower pin row
Review the lower connection row at 2.00 mm pitch, including segment assignments and rearward clearance for the PCB.
Drive frequency
The drawing specifies 75 Hz with 1/4 duty and 1/3 bias. Check the frame frequency as well as the 4.5 V LCD operating voltage when choosing the driver.
03 / APPLICATION DIRECTION
Fuel-display panels
Use this reference to plan fuel-level and distance indications on an instrument panel. Confirm the required level segments, numeric range and distance units with the instrument design.
04 / PRODUCT SUPPORT
From reference to your design.
Which LCD drive settings are listed for S3650D?
The reference lists 4.5 V LCD operating voltage and 1/4 duty, 1/3 bias, at 75 Hz frame frequency. Check these requirements against your LCD driver; final electrical requirements are confirmed for the project.
Does the fuel bar include a fuel-level sensor?
The fuel bar and pump symbol are display artwork. The sensor, signal processing and mapping of fuel level to segments belong to the complete instrument design.
YOUR NEXT LCD PROJECT
Let’s shape your display.
Share your required display content, enclosure space, drive arrangement, operating environment and target quantity.
