Time and units
Confirm the time format, colon behavior, temperature unit and humidity field before defining the segment map.
PRODUCT EXPLORERFront view
Rotate, zoom and inspect the product. Loads on request.
Front rendering of S04802D, showing the screen artwork and glass outline. Materials and fine geometry are visual references for the OEM project.
OEM DISPLAY REFERENCE
S04802D
HTN clock display reference
S04802D is a negative-mode HTN display reference with large time digits above smaller temperature and humidity fields. A battery indicator sits beside the clock, and a single lower pin row provides the physical connection.
45.00 × 25.00 mmMinimum viewing area
5.0 VLCD operating voltage
A starting point for your custom display.
Images, 3D geometry and listed parameters are OEM reference information. Final dimensions, electrical requirements, optical configuration and construction are confirmed for your project.
Product video
Short product video. Playback starts when you press play.
01 / REFERENCE CONFIGURATION
Start with the essentials.
A reference configuration for discussing your LCD project. Final specifications are subject to project confirmation.
| Model reference | S04802D |
|---|---|
| Display mode | HTN, negative |
| Rear glass width × height | 48.00 ± 0.20 × 30.00 ± 0.20 mm |
| Front glass width × height | 48.00 ± 0.20 × 28.00 ± 0.20 mm |
| Minimum viewing area | 45.00 × 25.00 mm |
| LCD thickness | 2.80 mm maximum |
| Glass thickness per layer | 1.10 ± 0.10 mm |
| Connection | 21 pins along the lower edge |
| Pin pitch | 2.00 mm |
| LCD operating voltage | 5.0 V |
| Drive condition | 1/4 duty, 1/3 bias |
| Frame frequency | 64 Hz |
| Viewing direction | 12 o’clock |
| Front and rear polarizers | Transmissive, adhesive |
| Operating temperature | 0 °C to +50 °C |
| Storage temperature | −10 °C to +60 °C |
02 / OEM DESIGN
Make the display fit your product.
Bring your requirements. We will review the configuration with you.
Lower pin row
Review the lower connection row and rearward clearance together with PCB placement, mounting supports and the viewing opening.
Viewing and environment
Evaluate the 12 o’clock viewing direction and chosen illumination in the enclosure. Check the documented temperature range against the intended product conditions.
03 / APPLICATION DIRECTION
Clocks
Plan the time format, environmental readings and battery states for a clock interface. Temperature, humidity and battery measurements come from the host electronics; the LCD provides the corresponding display fields.
04 / PRODUCT SUPPORT
From reference to your design.
Does the display measure temperature or humidity?
No. The glass contains the numeric fields and symbols; measurement sensors and processing belong to the host system.
What does the negative display reference include?
It identifies the documented HTN display mode and artwork. The final optical stack and illumination are confirmed for the project.
YOUR NEXT LCD PROJECT
Let’s shape your display.
Share your required display content, enclosure space, drive arrangement, operating environment and target quantity.
