Clock and Timer LCD Displays

Clocks, timers and calendar displays are about large digits that read from a distance, with small icons for alarm, day of week, countdown or temperature. Kitchen and sports timers add start, stop and lap legends; desk clocks often add date and room temperature.

Battery-powered models favour reflective TN or HTN glass at a low duty ratio for the longest run time. Mains-powered clocks often use VA negative glass with a backlight for a bright, modern look.

Clock and timer LCD references

The table lists 18 clock and timer LCD references with full drawing data: 10 TN, 3 HTN, 2 STN, 2 VA and 1 DFSTN. LCD operating voltages run from 2.8 V to 5.0 V, and the most common drive is 1/4 duty, 1/3 bias. The widest operating range on these drawings is −30°C to +80°C.

ModelLCD typeViewing areaVoltageDriveOperating temp.Connection
S3169DSTN (gray), positive25.3 × 17.4 mm2.8 V1/8 duty, 1/4 bias−20°C to +70°CZebra (elastomer) connector
S3199DSTN (gray), positive25.3 × 18.4 mm2.8 V1/8 duty, 1/4 bias−20°C to +70°CZebra (elastomer) connector
S3376DTN, positive55.0 × 26.5 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S3391DDFSTN, negative60.0 × 60.0 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S3463DTN, positive40.0 × 15.0 mm3.0 V1/3 duty, 1/2 bias0°C to +50°C—
S4156DHTN, positive46.5 × 20.2 mm4.5 V1/4 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector
S4294DHTN, positive105.0 × 67.0 mm3.0 V1/4 duty, 1/3 bias0°C to +60°CMetal pins
S4315DTN, positive98.8 × 49.72 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4354DHTN, positive39.3 × 18.5 mm5.0 V1/4 duty, 1/3 bias−30°C to +80°CMetal pins
S4422DTN, positive28.0 × 26.5 mm2.8 V1/4 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector
S4426DTN, negative34.95 × 18.3 mm5.0 V1/4 duty, 1/3 bias−30°C to +80°CZebra (elastomer) connector
S4466DTN, positive41.0 × 25.0 mm3.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4489DVA, negative47.71 × 18.56 mm4.5 V1/4 duty, 1/3 bias−10°C to +60°CMetal pins
S4700DTN, positive53.0 × 31.0 mm3.3 V1/4 duty, 1/3 bias−10°C to +50°CMetal pins
S4775DTN, positive8.2 × 20.5 mm5.0 V1/3 duty, 1/2 bias0°C to +50°CZebra (elastomer) connector
S4803DTN, positive54.0 × 28.0 mm3.0 V1/4 duty, 1/3 bias−30°C to +50°CZebra (elastomer) connector
S4808DVA, negative19.0 × 15.0 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°C—
S4815DTN, positive96.0 × 53.5 mm5.0 V1/4 duty, 1/3 bias0°C to +50°CHeat-seal connector

More clock and timer references

  • S04802D — HTN clock display reference
  • S2287D — Calendar LCD with two rows of three large digits
  • S3113D — Octagonal STN segment LCD with a clock-face layout
  • S4631D — TN LCD

Real samples on video

Short clips of real SuccessLCD samples for this application. Each player loads when you press play.

S3113D LCD sample in operation
S3113D · Clock
S4631D LCD sample in operation
S4631D · Competition timer
S4004D LCD sample in operation
S4004D · Timer and alarm clock

What to send for a custom clock and timer LCD

  • Your display artwork, or a sketch of the digits, icons and legends you need
  • Outline, viewing area and thickness limits from your housing
  • LCD operating voltage, or the LCD driver or MCU you plan to use
  • Operating and storage temperature
  • Connection: metal pins, zebra, FPC or heat seal
  • Backlight colour, if any, and the expected annual quantity

Any reference above can be used as a starting point: tell us the model number and what needs to change.

Send your clock and timer LCD requirements

Scroll to Top
Get a QuoteWhatsApp