LCDs for Home Appliances
Home and kitchen appliances use the display for temperature, time, mode and status: a rice cooker counting down, a water purifier showing hot, cold and filter life, a fan or air conditioner showing speed and set point, a hair dryer showing heat and airflow. The glass usually sits behind a tinted or printed window and close to heat or steam, so viewing angle, operating temperature and backlight colour are best fixed together with the housing.
Negative VA glass with a white, red or blue backlight gives the dark, high-contrast front that most current kitchen and bathroom products use. Positive TN and HTN glass is the lower-cost choice where the unit is read under room light, and a transflective rear polarizer keeps it readable when the backlight is off.
Related guides: TN, HTN, STN, FSTN, DFSTN and VA compared · Duty and bias explained · LCD connection types · All LCD product references
Home appliance LCD references
The table lists 36 home appliance LCD references with full drawing data: 21 VA, 8 HTN and 7 TN. LCD operating voltages run from 3.0 V to 5.5 V, and the most common drive is 1/4 duty, 1/3 bias. The widest operating range on these drawings is −30°C to +85°C.
| Model | LCD type | Viewing area | Voltage | Drive | Operating temp. | Connection |
|---|---|---|---|---|---|---|
| S2881D | VA, negative | 103.0 × 50.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S3370D | VA, negative | 19.0 × 36.0 mm | 5.0 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Metal pins |
| S3398D | VA, negative | 57.0 × 45.0 mm | 3.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S3460D | HTN | 18.0 × 15.0 mm | 5.0 V | 1/3 duty, 1/2 bias | −30°C to +85°C | Metal pins |
| S3489D | VA, negative | 66.0 × 28.0 mm | — | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S3512D | VA, negative | 90.0 × 41.0 mm | 3.3 V | 1/4 duty, 1/3 bias | −10°C to +60°C | Metal pins |
| S3651D | VA, negative | 97.0 × 40.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S368301D | VA, negative | 100.0 × 100.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S3967D | TN, positive | 96.0 × 30.1 mm | 5.0 V | Static | −10°C to +60°C | Metal pins |
| S3978D | VA, negative | 13.5 × 24.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S3988D | HTN, positive | 44.5 × 44.5 mm | 3.0 V | 1/4 duty, 1/3 bias | −10°C to +50°C | Zebra (elastomer) connector |
| S3989D | TN, positive | 142.0 × 34.7 mm | 5.5 V | 1/2 duty, 1/2 bias | −20°C to +70°C | Metal pins |
| S4003D | VA, negative | 57.0 × 19.0 mm | 4.5 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4072D | VA, negative | 84.95 × 35.95 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4105D | TN, positive | 87.0 × 52.4 mm | 4.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4141D | HTN, positive | 23.7 × 10.8 mm | 3.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4161D | VA, negative | 30.0 × 20.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −10°C to +60°C | Metal pins |
| S4163D | HTN, positive | 44.5 × 44.5 mm | 3.0 V | 1/4 duty, 1/3 bias | −10°C to +50°C | Zebra (elastomer) connector |
| S4172D | VA, negative | 22.0 × 37.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | FPC |
| S4246D | VA, negative | 45.0 × 46.7 mm | 3.3 V | 1/4 duty, 1/3 bias | −20°C to +70°C | — |
| S4282D | VA, negative | 35.0 × 35.0 mm | 3.3 V | 1/4 duty, 1/3 bias | −20°C to +70°C | FPC |
| S4306D | VA, negative | 23.6 × 5.6 mm | 3.3 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Metal pins |
| S4310D | VA, negative | 100.0 × 50.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −10°C to +60°C | Metal pins |
| S4318D | HTN, negative | 35.0 × 24.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4319D | HTN, positive | 38.0 × 10.0 mm | 3.3 V | 1/4 duty, 1/3 bias | −20°C to +70°C | FPC |
| S4332D | HTN, negative | 53.8 × 26.0 mm | 4.5 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4347D | VA, negative | 45.0 × 46.0 mm | 3.3 V | 1/4 duty, 1/3 bias | −20°C to +70°C | — |
| S4370D | HTN, positive | 23.6 × 5.6 mm | 3.3 V | 1/4 duty, 1/3 bias | −20°C to +70°C | FPC |
| S4373D | TN, positive | 39.0 × 15.0 mm | 3.3 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Metal pins |
| S4465D | VA, negative | 78.85 × 42.5 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4488D | VA, negative | 31.0 × 39.0 mm | 3.3 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4660D | VA, negative | 61.7 × 38.0 mm | 4.5 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4707D | VA, negative | 25.0 × 25.0 mm | 3.3 V | 1/4 duty, 1/3 bias | −10°C to +50°C | Metal pins |
| S4768D | TN, positive | 39.6 × 18.1 mm | 5.0 V | 1/4 duty, 1/3 bias | −10°C to +80°C | Metal pins |
| S4784D | TN, positive | 22.0 × 10.5 mm | 3.0 V | 1/2 duty, 1/2 bias | −20°C to +70°C | Metal pins |
| S4787D | TN, positive | 52.0 × 27.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
More home appliance references
- S2701D — Segment LCD for LED mirrors, 94.59 × 29.0 mm viewing area
- S3203D — Blue negative STN refrigerator display reference
- S3420D — FSTN segment LCD module with FPC and backlight
- S3487D — TN negative purifier display reference
- S3498D — Compact TN remote-control display with side pin rows
- S3711D — Blue negative-mode HTN display for food-processor controls
What to send for a custom home appliance LCD
- Your display artwork, or a sketch of the digits, icons and legends you need
- Outline, viewing area and thickness limits from your housing
- LCD operating voltage, or the LCD driver or MCU you plan to use
- Operating and storage temperature, especially if the display sits near a heater, steam outlet or motor
- Connection: metal pins, zebra, FPC or heat seal
- Backlight colour, if any, and the expected annual quantity
Any reference above can be used as a starting point: tell us the model number and what needs to change.
