Smart Home Touch Panel Displays for OEM Wall Panels
SuccessLCD supplies smart home touch panel displays as TFT modules with capacitive touch fitted, starting from catalogue references such as the S400MBZS-01D (4-inch square, 480 × 480, RGB + SPI, capacitive touch) and the S400MB1ZS-01F2 (4-inch square, 720 × 720, MIPI, capacitive touch). These are the display and touch assemblies behind a wall panel, thermostat or control hub, not finished smart home devices. The display cell comes from an existing reference; the cover lens, touch tuning, FPC and bonding are adapted to your faceplate.
Request a quote WhatsApp +86 134 3360 8240 Touch panel and cover lens options
Smart home touch panel display references
Each row is a SuccessLCD catalogue reference with capacitive touch fitted, and links to its product page. The square 4-inch modules are the usual starting point for a wall panel; the smaller and wider formats suit thermostats, switches and desktop hubs.
| Reference | Size | Resolution | Display interface | Touch | Outline (reference) |
|---|---|---|---|---|---|
| STFT18D | 1.8-inch | 360 × 360 | RGB | Capacitive | Confirm for your project |
| S35001D | 3.5-inch | 320 × 240 | RGB | Capacitive | 76.96 × 63.96 × 4.70 mm |
| STFT397D | 3.97-inch | 480 × 800 | MIPI | Capacitive | Confirm for your project |
| S400MBZS-01D | 4-inch square | 480 × 480 | RGB + SPI | Capacitive | 83.7 × 83.7 mm |
| S400MHZS-03F1 | 4-inch square | 480 × 480 | RGB + SPI | Capacitive | 83.7 × 83.7 mm |
| S400MB1ZS-01F2 | 4-inch square | 720 × 720 | MIPI | Capacitive | 84 × 84 mm |
| STFT43-02D | 4.3-inch | 480 × 272 | RGB | Capacitive | Confirm for your project |
| STFT50-02D | 5-inch | 800 × 480 | RGB | Capacitive, mirror cover glass | Confirm for your project |
Outlines are reference values. Brightness, operating temperature, connector and pin assignment are confirmed against the drawing of the revision you are quoted.
Fitting a 4-inch wall panel display behind the faceplate
Worked example: an 86 mm faceplate. Take a faceplate of 86 × 86 mm as an example, and check the size your own market and back box use. The S400MBZS-01D has a reference outline of 83.7 × 83.7 mm, which leaves (86 − 83.7) / 2 = 1.15 mm on each side. The S400MB1ZS-01F2 is 84 × 84 mm, which leaves 1.0 mm per side.
A separate bezel has no room at that margin. The cover lens has to be the front of the product, with its printed border hiding the area outside the display. These are outline figures only: take the active area, the viewing area and the FPC exit from the drawing, because the FPC bend and the connector need depth behind the plate.
The cover lens is the product face
On a wall panel the cover lens is what the user sees and touches, and it is the part most often changed: outline, thickness, holes, printed border and logo, and an AG, AR or AF surface. The touch is then tuned for the final lens thickness. The STFT50-02D is a catalogue example of a 5-inch module with a mirror cover glass. The display can sit behind the lens with an air gap and frame tape, or be optically bonded.
The TFT cell is made in fixed sizes, so the diagonal, resolution and display interface are chosen from existing cells. See what can be customized on a TFT module and square TFT LCD modules.
Choosing the interface for a smart home controller
The interface follows the processor in your panel. The 480 × 480 square references are listed with RGB + SPI, which suits microcontrollers and small processors that have a parallel LCD controller. The 720 × 720 S400MB1ZS-01F2 and the 480 × 800 STFT397D use MIPI, which suits application processors with a DSI output. TFT display interface options compares them.
What to send with a smart home display enquiry
- The processor or module in the panel and the display interface it provides.
- The faceplate size, the back box depth and where the FPC can exit.
- Cover lens outline, thickness, printing, colour and surface treatment.
- Whether the panel is used with wet hands or mounted where it sees direct sunlight.
- The operating temperature inside the wall box.
- The expected production life of the product.
FAQ
Which display sizes suit a smart home wall panel?
For a square wall plate, the catalogue lists three 4-inch square references with capacitive touch: S400MBZS-01D and S400MHZS-03F1 (480 × 480, RGB + SPI) and S400MB1ZS-01F2 (720 × 720, MIPI). Other formats with capacitive touch run from the 1.8-inch STFT18D (360 × 360) to the 5-inch STFT50-02D (800 × 480).
Can the cover lens be printed to match our panel design?
Yes. The cover lens outline, thickness, holes, printed border and logo and the surface treatment are adapted per project, and the touch is tuned for the final lens thickness. The display cell behind it is chosen from existing sizes.
Which interface should a smart home or IoT display use?
Use the interface your processor already provides. The references on this page are listed with RGB, RGB + SPI or MIPI. A different interface usually means a different display cell, so settle the processor before the display.
How do I select a TFT display module for an OEM smart home product?
Start from the processor and the display output it has, then the faceplate. For a square wall plate the usual choices are the 4-inch S400MBZS-01D or S400MHZS-03F1 (480 × 480, RGB + SPI) and the S400MB1ZS-01F2 (720 × 720, MIPI). Then fix the cover lens, touch tuning and FPC exit to your housing.
Who holds the quality certificates?
The group factory, Success Electronics Ltd, is certified to IATF 16949:2016, ISO 9001:2015 and ISO 14001:2015. The certificates are issued to the factory, not to the Hong Kong trading company.
Planning a smart home touch panel? Send the processor, faceplate size and cover lens idea, and SuccessLCD will match the closest reference. You can also browse the TFT LCD module catalogue first.
