LCDs for Home Appliances

Home and kitchen appliances use the display for temperature, time, mode and status: a rice cooker counting down, a water purifier showing hot, cold and filter life, a fan or air conditioner showing speed and set point, a hair dryer showing heat and airflow. The glass usually sits behind a tinted or printed window and close to heat or steam, so viewing angle, operating temperature and backlight colour are best fixed together with the housing.

Negative VA glass with a white, red or blue backlight gives the dark, high-contrast front that most current kitchen and bathroom products use. Positive TN and HTN glass is the lower-cost choice where the unit is read under room light, and a transflective rear polarizer keeps it readable when the backlight is off.

Home appliance LCD references

The table lists 36 home appliance LCD references with full drawing data: 21 VA, 8 HTN and 7 TN. LCD operating voltages run from 3.0 V to 5.5 V, and the most common drive is 1/4 duty, 1/3 bias. The widest operating range on these drawings is −30°C to +85°C.

ModelLCD typeViewing areaVoltageDriveOperating temp.Connection
S2881DVA, negative103.0 × 50.0 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S3370DVA, negative19.0 × 36.0 mm5.0 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S3398DVA, negative57.0 × 45.0 mm3.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S3460DHTN18.0 × 15.0 mm5.0 V1/3 duty, 1/2 bias−30°C to +85°CMetal pins
S3489DVA, negative66.0 × 28.0 mm—1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S3512DVA, negative90.0 × 41.0 mm3.3 V1/4 duty, 1/3 bias−10°C to +60°CMetal pins
S3651DVA, negative97.0 × 40.0 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S368301DVA, negative100.0 × 100.0 mm5.0 V1/4 duty, 1/3 bias−30°C to +80°CMetal pins
S3967DTN, positive96.0 × 30.1 mm5.0 VStatic−10°C to +60°CMetal pins
S3978DVA, negative13.5 × 24.0 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S3988DHTN, positive44.5 × 44.5 mm3.0 V1/4 duty, 1/3 bias−10°C to +50°CZebra (elastomer) connector
S3989DTN, positive142.0 × 34.7 mm5.5 V1/2 duty, 1/2 bias−20°C to +70°CMetal pins
S4003DVA, negative57.0 × 19.0 mm4.5 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4072DVA, negative84.95 × 35.95 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4105DTN, positive87.0 × 52.4 mm4.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4141DHTN, positive23.7 × 10.8 mm3.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4161DVA, negative30.0 × 20.0 mm5.0 V1/4 duty, 1/3 bias−10°C to +60°CMetal pins
S4163DHTN, positive44.5 × 44.5 mm3.0 V1/4 duty, 1/3 bias−10°C to +50°CZebra (elastomer) connector
S4172DVA, negative22.0 × 37.0 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CFPC
S4246DVA, negative45.0 × 46.7 mm3.3 V1/4 duty, 1/3 bias−20°C to +70°C—
S4282DVA, negative35.0 × 35.0 mm3.3 V1/4 duty, 1/3 bias−20°C to +70°CFPC
S4306DVA, negative23.6 × 5.6 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4310DVA, negative100.0 × 50.0 mm5.0 V1/4 duty, 1/3 bias−10°C to +60°CMetal pins
S4318DHTN, negative35.0 × 24.0 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4319DHTN, positive38.0 × 10.0 mm3.3 V1/4 duty, 1/3 bias−20°C to +70°CFPC
S4332DHTN, negative53.8 × 26.0 mm4.5 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4347DVA, negative45.0 × 46.0 mm3.3 V1/4 duty, 1/3 bias−20°C to +70°C—
S4370DHTN, positive23.6 × 5.6 mm3.3 V1/4 duty, 1/3 bias−20°C to +70°CFPC
S4373DTN, positive39.0 × 15.0 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4465DVA, negative78.85 × 42.5 mm5.0 V1/4 duty, 1/3 bias−30°C to +80°CMetal pins
S4488DVA, negative31.0 × 39.0 mm3.3 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4660DVA, negative61.7 × 38.0 mm4.5 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4707DVA, negative25.0 × 25.0 mm3.3 V1/4 duty, 1/3 bias−10°C to +50°CMetal pins
S4768DTN, positive39.6 × 18.1 mm5.0 V1/4 duty, 1/3 bias−10°C to +80°CMetal pins
S4784DTN, positive22.0 × 10.5 mm3.0 V1/2 duty, 1/2 bias−20°C to +70°CMetal pins
S4787DTN, positive52.0 × 27.0 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins

More home appliance references

  • S2701D — Segment LCD for LED mirrors, 94.59 × 29.0 mm viewing area
  • S3203D — Blue negative STN refrigerator display reference
  • S3420D — FSTN segment LCD module with FPC and backlight
  • S3487D — TN negative purifier display reference
  • S3498D — Compact TN remote-control display with side pin rows
  • S3711D — Blue negative-mode HTN display for food-processor controls

What to send for a custom home appliance LCD

  • Your display artwork, or a sketch of the digits, icons and legends you need
  • Outline, viewing area and thickness limits from your housing
  • LCD operating voltage, or the LCD driver or MCU you plan to use
  • Operating and storage temperature, especially if the display sits near a heater, steam outlet or motor
  • Connection: metal pins, zebra, FPC or heat seal
  • Backlight colour, if any, and the expected annual quantity

Any reference above can be used as a starting point: tell us the model number and what needs to change.

Send your home appliance LCD requirements

Scroll to Top
Get a QuoteWhatsApp