Wide display window
Check the 57.60 × 25.60 mm minimum viewing area and the 60.00 × 32.00 mm rear glass outline against the panel opening.
PRODUCT EXPLORERFront view
Rotate, zoom and inspect the product. Loads on request.
Front rendering of S3986D, showing the display artwork and glass outline. Materials and fine geometry are visual references for the OEM project.
OEM DISPLAY REFERENCE
S3986D
HTN power display with an eight-digit field and Chinese legends
S3986D is an HTN, positive-mode segmented LCD reference with an eight-digit field, Chinese status legends and kWh, V, A and power-factor markings. Smaller channel and status indicators run along the bottom edge.
57.60 × 25.60 mmMinimum viewing area
3.3 VLCD operating voltage
A starting point for your custom display.
Images, 3D geometry and listed parameters are OEM reference information. Final dimensions, electrical requirements, optical configuration and construction are confirmed for your project.
Product video
Short product video. Playback starts when you press play.
01 / REFERENCE CONFIGURATION
Start with the essentials.
A reference configuration for discussing your LCD project. Final specifications are subject to project confirmation.
| Model reference | S3986D |
|---|---|
| Rear glass width × height | 60.00 ± 0.20 × 32.00 ± 0.20 mm |
| Front glass width × height | 60.00 ± 0.20 × 28.00 ± 0.20 mm |
| Minimum viewing area | 57.60 × 25.60 mm |
| LCD thickness | 2.80 mm maximum |
| Glass thickness per layer | 1.10 ± 0.10 mm |
| Pin pitch | 2.00 mm |
| Display mode | HTN, positive |
| Connection | Pins |
| LCD operating voltage | 3.3 V |
| Drive condition | 1/8 duty, 1/4 bias |
| Frame frequency | 64 Hz |
| Viewing direction | 6 o’clock |
| Rear polarizer | Transflective, adhesive |
| Front polarizer | Transmissive, adhesive |
| Operating temperature | −25 °C to +70 °C |
| Storage temperature | −30 °C to +75 °C |
02 / OEM DESIGN
Make the display fit your product.
Bring your requirements. We will review the configuration with you.
Two pin rows
Review the upper and lower pin rows at 2.00 mm pitch. Confirm their segment assignments and rearward clearance with the PCB layout.
Electrical drive
The listed LCD drive is 3.3 V, 1/8 duty and 1/4 bias. Review these settings separately from the voltage or current being measured by the finished equipment.
03 / APPLICATION DIRECTION
Electrical power and energy displays
Use this reference to plan numeric and status indications for an electrical power or energy panel. Confirm the language, units, channel labels and displayed quantities with the metering electronics.
04 / PRODUCT SUPPORT
From reference to your design.
Which LCD drive settings are listed for S3986D?
The reference lists 3.3 V LCD operating voltage and 1/8 duty, 1/4 bias, at 64 Hz frame frequency. Check these requirements against your LCD driver; final electrical requirements are confirmed for the project.
Is the listed 3.3 V the voltage measurement range?
No. It is the LCD operating voltage. The measurement range, isolation, accuracy and metering functions belong to the finished equipment and require separate specifications.
YOUR NEXT LCD PROJECT
Let’s shape your display.
Share your required display content, enclosure space, drive arrangement, operating environment and target quantity.
