Custom MIPI Display Modules: 3.97 to 10.1 Inch MIPI DSI TFT References

SuccessLCD supplies MIPI display modules as OEM references from 3.97 to 10.1 inches, from 480 × 800 to 800 × 1280 pixels, most of them with capacitive touch. MIPI DSI carries the picture on a few high-speed pairs over a short FPC, which suits compact products built around an application processor. This page lists the references, what to confirm about the DSI link, and what to send with an enquiry.

Request a quote TFT LCD catalogue

Pixel formats of five MIPI display references drawn to the same pixel scaleFive rectangles compare the pixel formats of MIPI display references at one scale: STFT397D at 480 by 800, S400MB1ZS-01F2 at 720 by 720, STFT50-01D at 800 by 480, S550MEKI-01 at 720 by 1280 and STFT1010D at 800 by 1280. Only the 800 by 480 format is landscape.MIPI display references, pixel formats to scale480 × 800STFT397D3.97 in720 × 720S400MB1ZS-01F24 in square800 × 480STFT50-01D5 in720 × 1280S550MEKI-015.5 in800 × 1280STFT1010D10.1 inRectangles show pixel count, not physical size. Four of the five formats are portrait or square.
Figure: pixel formats of the MIPI references. Most MIPI panels are portrait-native, which matters if your product is landscape.

MIPI display references

ReferenceSizeResolutionInterfaceTouch
STFT397D3.97 in480 × 800MIPICapacitive
S400MB1ZS-01F24 in square720 × 720MIPICapacitive
STFT50-01D5 in800 × 480MIPI + RGBCapacitive
S550MEKI-015.5 in720 × 1280MIPINot fitted
STFT1010D10.1 in800 × 1280MIPICapacitive

The 4-inch square reference measures 84 × 84 mm and the 5.5-inch reference 70.25 × 127.61 mm. For the others the outline is confirmed for the project. The full range is in the TFT LCD module catalogue.

What to confirm on a MIPI display before design freeze

  • Lane count and bit rate. The host must provide the number of data lanes the panel uses, at the rate its resolution and refresh need.
  • Video mode or command mode. In video mode the host streams every frame. In command mode the panel keeps the picture in its own frame memory. Confirm which one the panel uses.
  • Initialization sequence. A MIPI panel stays dark until the host sends the set-up commands for its driver IC. Ask for the sequence that matches the exact module revision.
  • Native orientation. 480 × 800, 720 × 1280 and 800 × 1280 are portrait formats. If the product is landscape, the host has to rotate the image, so check that your display pipeline can do it.
  • FPC length and routing. DSI is meant for short connections inside the product, with controlled-impedance pairs on the host board.
  • Touch controller interface and its FPC, where touch is fitted.

Lanes, bit rates and the two operating modes are worked through in the MIPI DSI interface guide.

What can be customized

The TFT cell is fixed by the panel fab. The module around it is what changes:

What each change involves is explained in what can be customized on a TFT module, and the general route is on the custom TFT display page.

When another interface fits better

MIPI needs a host with a DSI output, which usually means an application processor. For a microcontroller, an SPI display or an RGB panel is the simpler choice. For equipment where the display sits a cable length from the processor board, an LVDS display is the usual fit. The trade-offs are in interface options for an OEM TFT module.

What to send with a MIPI display enquiry

  • The host processor and the number of DSI lanes it offers.
  • The window size, the outline limits and the mounting orientation.
  • Resolution, brightness and where the product is used.
  • Touch, cover lens and bonding needs.
  • Operating temperature range.
  • Expected annual quantity and project schedule.

A fuller list is in what to include in a TFT LCD module RFQ.

FAQ

What sizes of MIPI display does SuccessLCD offer?

The catalogue references are 3.97, 4, 5, 5.5 and 10.1 inches, from 480 × 800 to 800 × 1280 pixels. Four of the five include capacitive touch. Other sizes depend on which standard TFT cells are available, so send the window size you need.

Is a MIPI display better than an LVDS display?

Neither is better in general. MIPI DSI suits compact products where a short FPC connects the panel to an application processor. LVDS suits equipment where the display is a cable length away from the processor board.

Why does my MIPI display stay dark?

A MIPI panel needs an initialization sequence for its driver IC before it shows an image, and the lane count and timing must match. Check those three items against the module documents before suspecting the panel.

Need a MIPI display for your product? Send the host processor, the window size, the orientation, and the brightness and touch you need. We will match a reference and list what has to change. Send a MIPI display enquiry, or browse the TFT LCD module catalogue.

Scroll to Top
Get a QuoteWhatsApp