Display layout
Define the readings, symbols and graphics your users need.
PRODUCT EXPLORERFront view
Rotate, zoom and inspect the product. Loads on request.
Product rendering on a white background. Screen artwork, materials and fine details are visual references; final construction is confirmed for the OEM project.
OEM DISPLAY REFERENCE
S12864D
128 × 64 graphic LCD reference
S12864D is a 128 × 64 graphic LCD reference built around a chip-on-board assembly. Its 93 × 70 mm PCB, metal bezel and 20-pin connection provide a starting point for reviewing the display window, mounting and host connection in an OEM product.
Chip-on-Board LCDDisplay family
Interactive 3DExplore the product
A starting point for your custom display.
Images, 3D and parameters are reference information. Final dimensions, electrical requirements and construction are confirmed for your project.
01 / REFERENCE CONFIGURATION
Start with the essentials.
A reference configuration for discussing your LCD project. Final specifications are subject to project confirmation.
| Model reference | S12864D |
|---|---|
| Display format | 128 × 64 pixels |
| Construction | Chip-on-Board LCD assembly |
| PCB width × height | 93.00 ± 0.50 × 70.00 ± 0.50 mm |
| Bezel width × height | 77.20 ± 0.20 × 50.20 ± 0.20 mm |
| Viewing area | 72.00 × 40.00 mm |
| Active area | 66.52 × 33.24 mm |
| External connection | 20-pin header, 2.54 mm pitch |
| Mounting-hole centre spacing | 88.00 ± 0.30 × 65.00 ± 0.30 mm |
02 / OEM DESIGN
Make the display fit your product.
Bring your requirements. We will review the configuration with you.
Mechanical fit
Define the viewing window, available space, mounting method and connection position.
Electrical requirements
Confirm your host controller, supply, drive method and backlight requirements before sampling.
03 / APPLICATION DIRECTION
Graphic display interfaces
Consider this graphic display format for text, menus, measured values and status graphics in an embedded interface. Define the content and viewing conditions of the complete product before confirming the LCD configuration.
04 / PRODUCT SUPPORT
From reference to your design.
Is the 72 × 40 mm viewing area the same as the active area?
No. The reference drawing identifies a 72 × 40 mm viewing area and a 66.52 × 33.24 mm active area. Use the appropriate dimension when reviewing the enclosure opening and displayed content.
What does the 3D model show?
The interactive model helps you explore the product form and connection arrangement. It is a visual reference; use the project-confirmed engineering information for assembly design.
YOUR NEXT LCD PROJECT
Let’s shape your display.
Share your required display content, enclosure space, drive arrangement, operating environment and target quantity.
