Thermo-Hygrometer LCD Displays

Thermo-hygrometers and weather stations show temperature and relative humidity side by side, often with a comfort indicator, min/max memory and a clock. Most run for a year or longer on one or two AAA cells, so the display is almost always read without a backlight.

Reflective or transflective TN and HTN glass at a low duty ratio is the common choice. Large digits and a wide viewing angle matter more than resolution, because these units sit on shelves and walls and are read from a distance.

Thermo-hygrometer LCD references

The table lists 12 thermo-hygrometer LCD references with full drawing data: 7 TN, 3 HTN and 2 VA. LCD operating voltages run from 2.9 V to 4.5 V, and the most common drive is 1/4 duty, 1/3 bias. The widest operating range on these drawings is −40°C to +80°C.

ModelLCD typeViewing areaVoltageDriveOperating temp.Connection
S3477DTN, positive67.6 × 67.6 mm3.0 V1/4 duty, 1/3 bias−20°C to +70°CZebra (elastomer) connector
S4015DVA, negative45.25 × 16.59 mm3.3 V1/4 duty, 1/3 bias−10°C to +60°CZebra (elastomer) connector
S4081DVA, negative29.0 × 32.0 mm3.3 V1/4 duty, 1/3 bias−10°C to +60°CMetal pins
S4133DTN, positive62.8 × 53.5 mm3.0 V1/4 duty, 1/3 bias−20°C to +70°CZebra (elastomer) connector
S4311DTN, positive27.0 × 27.0 mm3.0 V1/4 duty, 1/2 bias0°C to +50°CZebra (elastomer) connector
S4523DHTN, positive45.14 × 38.24 mm3.3 V1/4 duty, 1/3 bias−20°C to +85°CMetal pins
S4527DHTN, positive41.74 × 37.63 mm2.9 V1/4 duty, 1/3 bias−20°C to +70°CZebra (elastomer) connector
S4528DHTN, positive43.0 × 33.0 mm3.3 V1/4 duty, 1/3 bias−40°C to +80°CZebra (elastomer) connector
S4546DTN, positive74.0 × 63.0 mm4.5 V1/4 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector
S4547DTN, positive74.0 × 63.0 mm4.5 V1/4 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector
S4548DTN, positive74.0 × 63.0 mm4.5 V1/4 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector
S4572DTN, positive39.3 × 26.0 mm3.0 V1/8 duty, 1/3 bias−20°C to +70°CMetal pins

Real samples on video

Short clips of real SuccessLCD samples for this application. Each player loads when you press play.

S3439D LCD sample in operation
S3439D · Humidity controller
S3543D LCD sample in operation
S3543D · Dual-reading instrument

What to send for a custom thermo-hygrometer LCD

  • Your display artwork, or a sketch of the digits, icons and legends you need
  • Outline, viewing area and thickness limits from your housing
  • LCD operating voltage, or the LCD driver or MCU you plan to use
  • Operating and storage temperature
  • Connection: metal pins, zebra, FPC or heat seal
  • Backlight colour, if any, and the expected annual quantity

Any reference above can be used as a starting point: tell us the model number and what needs to change.

Send your thermo-hygrometer LCD requirements

Scroll to Top
Get a QuoteWhatsApp