Massager LCD Displays

Massagers and personal-care devices need a small display that shows mode, intensity level, time remaining and battery state. The display is part of the product’s look, so outline, icon style and backlight colour are usually designed together with the housing.

VA negative glass with coloured backlight zones gives the bright icon style that is common on neck, eye and body massagers. TN and HTN positive glass suits simpler units that run without a backlight and need the longest battery life.

Massager LCD references

The table lists 23 massager LCD references with full drawing data: 9 VA, 8 TN and 6 HTN. LCD operating voltages run from 3.0 V to 5.0 V, and the most common drive is 1/4 duty, 1/3 bias. The widest operating range on these drawings is −20°C to +70°C.

ModelLCD typeViewing areaVoltageDriveOperating temp.Connection
S3642DVA, negative14.5 × 13.27 mm3.3 V1/4 duty, 1/3 bias−10°C to +60°CMetal pins
S3716DHTN, positive38.8 × 53.3 mm3.6 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S3947DHTN, positive36.0 × 49.5 mm3.6 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4043DTN, positive40.89 × 38.37 mm3.0 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4087DVA, negative83.6 × 58.6 mm5.0 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4159DTN, positive48.4 × 86.4 mm3.6 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4183DTN, positive45.76 × 70.15 mm3.6 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4343DTN, negative83.0 × 65.0 mm3.0 V1/4 duty, 1/3 bias−10°C to +60°CMetal pins
S4405DTN, negative91.5 × 52.5 mm3.0 V1/4 duty, 1/3 bias−10°C to +60°CMetal pins
S4406DTN, positive52.0 × 65.0 mm3.0 V1/4 duty, 1/3 bias−10°C to +60°CMetal pins
S4419DHTN, positive46.4 × 38.0 mm3.6 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4542DTN, positive39.0 × 30.0 mm3.0 V1/3 duty, 1/2 bias0°C to +50°CMetal pins
S4552DHTN (blue), negative43.9 × 37.89 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector
S4554DTN, positive56.0 × 55.8 mm4.0 V1/4 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector
S4626DVA, negative38.4 × 52.9 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4639DVA, negative48.4 × 86.4 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4709DVA, negative84.6 × 59.6 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4733DVA, negative82.9 × 58.6 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4734DVA, negative82.9 × 58.6 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4750DHTN, positive47.0 × 60.2 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CFPC
S4767DHTN, positive51.4 × 40.4 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4811DVA, negative49.0 × 45.0 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4829DVA, negative31.8 × 42.4 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins

More massager references

  • S1386D — VA massage device display reference
  • S3817D — HTN LCD with body outline, mode field and A/B intensity scales
  • S4852D — VA LCD

Real samples on video

Short clips of real SuccessLCD samples for this application. Each player loads when you press play.

S3817D LCD sample in operation
S3817D · Massager
S4852D LCD sample in operation
S4852D · Massage device, VA
S1386D LCD sample in operation
S1386D · Massage device, VA negative

What to send for a custom massager LCD

  • Your display artwork, or a sketch of the digits, icons and legends you need
  • Outline, viewing area and thickness limits from your housing
  • LCD operating voltage, or the LCD driver or MCU you plan to use
  • Operating and storage temperature
  • Connection: metal pins, zebra, FPC or heat seal
  • Backlight colour, if any, and the expected annual quantity

Any reference above can be used as a starting point: tell us the model number and what needs to change.

Send your massager LCD requirements

Scroll to Top
Get a QuoteWhatsApp