Custom LCD Display Cost: What Drives Tooling and Unit Price
A custom LCD display costs what its new parts cost to tool and to build: at SuccessLCD a custom segment LCD such as the S3699D (TN, 41.0 × 21.0 mm, metal pins) carries its own glass tooling, and its unit cost then follows glass size, LCD mode, connection, backlight and quantity. TFT projects work differently, because the TFT cell is chosen from existing panels rather than tooled. Prices are quoted per project, so this page lists what drives them, catalogue references that show each choice, and what to send for a quote.
Request a quote WhatsApp +86 134 3360 8240 TFT LCD catalogue
Custom LCD references to start from
The SuccessLCD monochrome catalogue holds 496 references, most of them custom segment LCDs made for a specific product, each with a known mode, outline and connection. The six below show the main cost choices side by side.
| Reference | LCD mode | Outline | Connection | Drive, operating range | Used in |
|---|---|---|---|---|---|
| S3699D | TN, positive | 41.0 × 21.0 mm | Metal pins; white LED backlight on the drawing | 3.6 V; −30 to +80 °C | Thermostats |
| S4473D | VA, negative | 41.4 × 37.0 mm | FPC | 4.0 V; −20 to +70 °C | Thermostats |
| S4355D | HTN, positive | 66.5 × 38.0 mm | Heat-seal connector | 5.0 V; −30 to +80 °C | Motorcycle instruments |
| S4026D | FSTN, positive | 75.8 × 52.5 mm | Metal pins | 4.2 V; −20 to +70 °C | Room thermostats |
| S3977D | HTN, positive | 82.5 × 68.5 mm | Zebra (elastomer) connector | 5.0 V; −20 to +70 °C | Boat instruments |
| S2947D | Segment, chip-on-glass | Per project | COG driver, FPC and backlight | Per project | E-bike displays |
If one is close to your product, the quote starts from a known glass, drive voltage and connection. A new segment pattern still needs new glass tooling, even with the same outline. More are in the monochrome LCD catalogue.
What moves tooling and unit cost
| Choice | One-time cost | Unit cost |
|---|---|---|
| Glass layout and outline | New glass tooling for every new segment pattern | Larger glass costs more to make |
| LCD mode | Quoted with the glass | TN lowest, HTN close to it, STN and FSTN in the middle, DFSTN and VA highest |
| Connection | An FPC is a part of its own to design | Pins, zebra, heat-seal and FPC each need different assembly |
| Backlight | Backlight design, if one is needed | LEDs, light guide and films |
| Driver | COG needs the driver IC chosen and bonded on the glass ledge | A driver on the glass replaces parts on your board |
| Wide temperature, heater, touch | Each is extra development | Extra materials and tests |
| Annual quantity | Spreads the one-time cost | Sets how production is planned |
The mode ranking holds for comparable glass size and construction. In practice size, connection, backlight and quantity move the price more than the mode does, as the monochrome LCD types guide explains. Pick the mode for the look and viewing angle you need, then spend the effort on outline and connection.
Metal pins solder straight into the PCB. A zebra strip needs no solder but needs a bezel that holds about 10 to 15 % compression. Heat-seal and FPC tails let the glass sit away from the board. Choose the one your assembly line already handles well.
The expensive part is changing the glass later
Moving an icon, adding a segment or changing the pin map after tooling means new glass, and paying for tooling again. To avoid it, freeze the artwork and the COM/SEG pin map before tooling, and leave spare segments for symbols that might be added. Labels that never change can be printed on the polarizer, the cover lens or the bezel and cost no pins. See segment LCD design and pin maps.
Worked example: how tooling spreads over a product’s life
Let T be the tooling charge on your quote. At 5,000 units a year over 4 years, each display carries T ÷ 20,000. If a layout change after year 1 needs new glass tooling T2, the remaining 15,000 units carry T2 ÷ 15,000 on top. With T2 equal to T, the tooling cost per display over the product’s life rises from T ÷ 20,000 to 2T ÷ 20,000, double the plan.
TFT projects: the cell is not the cost
A colour TFT cell is not redesigned for a module project; it is chosen from the cells a panel fab already makes. The cost sits in the parts around it: cover lens, touch, bonding, backlight and FPC. If your product needs graphics rather than fixed symbols, start with what can be customized on a TFT module or the custom touch screen display references.
What to send for a custom LCD quote
- The artwork: every digit, icon and bar segment, and which ones show at the same time.
- Outline, viewing area and mounting limits in the housing.
- LCD mode or the look you want, positive or negative, and the viewing direction.
- Drive voltage and the duty your MCU or driver supports.
- Connection: pins, zebra, heat-seal or FPC.
- Backlight colour, or none, and the operating temperature range.
- Expected annual quantity and the product’s planned life.
The full checklist for new glass is on the custom segment LCD page.
FAQ
How much does a custom LCD display cost?
It is quoted per project, because tooling and unit cost depend on the glass layout and size, the LCD mode, the connection, the backlight and the annual quantity. Send the artwork and those details, and SuccessLCD quotes the tooling and the unit price for that design.
Can I change a custom LCD after tooling?
Small changes such as a printed legend can go on the polarizer, cover lens or bezel. A new segment, a moved icon or a different pin map changes the glass and needs new tooling, so add spare segments before the drawing is frozen.
Can I start from an existing SuccessLCD reference?
Yes. The monochrome catalogue lists 496 references with mode, outline and connection. Starting from one fixes many decisions early, but any change to the segment pattern still needs new glass.
Who holds the quality certificates?
The group factory, Success Electronics Ltd, is certified to IATF 16949:2016, ISO 9001:2015 and ISO 14001:2015. The certificates are issued to the factory, not to the Hong Kong trading company.
Want a custom LCD quoted? Send the artwork, outline, mode, connection and annual quantity. SuccessLCD will point to the closest reference and quote tooling and unit price for your design, or browse the monochrome LCD catalogue first.
