Clock and Timer LCD Displays
Clocks, timers and calendar displays are about large digits that read from a distance, with small icons for alarm, day of week, countdown or temperature. Kitchen and sports timers add start, stop and lap legends; desk clocks often add date and room temperature.
Battery-powered models favour reflective TN or HTN glass at a low duty ratio for the longest run time. Mains-powered clocks often use VA negative glass with a backlight for a bright, modern look.
Related guides: TN, HTN, STN, FSTN, DFSTN and VA compared · 6 o’clock vs 12 o’clock viewing direction · Duty and bias explained · Transflective and reflective LCDs · All LCD product references
Clock and timer LCD references
The table lists 18 clock and timer LCD references with full drawing data: 10 TN, 3 HTN, 2 STN, 2 VA and 1 DFSTN. LCD operating voltages run from 2.8 V to 5.0 V, and the most common drive is 1/4 duty, 1/3 bias. The widest operating range on these drawings is −30°C to +80°C.
| Model | LCD type | Viewing area | Voltage | Drive | Operating temp. | Connection |
|---|---|---|---|---|---|---|
| S3169D | STN (gray), positive | 25.3 × 17.4 mm | 2.8 V | 1/8 duty, 1/4 bias | −20°C to +70°C | Zebra (elastomer) connector |
| S3199D | STN (gray), positive | 25.3 × 18.4 mm | 2.8 V | 1/8 duty, 1/4 bias | −20°C to +70°C | Zebra (elastomer) connector |
| S3376D | TN, positive | 55.0 × 26.5 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S3391D | DFSTN, negative | 60.0 × 60.0 mm | 3.3 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Metal pins |
| S3463D | TN, positive | 40.0 × 15.0 mm | 3.0 V | 1/3 duty, 1/2 bias | 0°C to +50°C | — |
| S4156D | HTN, positive | 46.5 × 20.2 mm | 4.5 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Zebra (elastomer) connector |
| S4294D | HTN, positive | 105.0 × 67.0 mm | 3.0 V | 1/4 duty, 1/3 bias | 0°C to +60°C | Metal pins |
| S4315D | TN, positive | 98.8 × 49.72 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4354D | HTN, positive | 39.3 × 18.5 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S4422D | TN, positive | 28.0 × 26.5 mm | 2.8 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Zebra (elastomer) connector |
| S4426D | TN, negative | 34.95 × 18.3 mm | 5.0 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Zebra (elastomer) connector |
| S4466D | TN, positive | 41.0 × 25.0 mm | 3.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4489D | VA, negative | 47.71 × 18.56 mm | 4.5 V | 1/4 duty, 1/3 bias | −10°C to +60°C | Metal pins |
| S4700D | TN, positive | 53.0 × 31.0 mm | 3.3 V | 1/4 duty, 1/3 bias | −10°C to +50°C | Metal pins |
| S4775D | TN, positive | 8.2 × 20.5 mm | 5.0 V | 1/3 duty, 1/2 bias | 0°C to +50°C | Zebra (elastomer) connector |
| S4803D | TN, positive | 54.0 × 28.0 mm | 3.0 V | 1/4 duty, 1/3 bias | −30°C to +50°C | Zebra (elastomer) connector |
| S4808D | VA, negative | 19.0 × 15.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | — |
| S4815D | TN, positive | 96.0 × 53.5 mm | 5.0 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Heat-seal connector |
More clock and timer references
Real samples on video
Short clips of real SuccessLCD samples for this application. Each player loads when you press play.
More working samples: YouTube playlist · SuccessLCD channel
What to send for a custom clock and timer LCD
- Your display artwork, or a sketch of the digits, icons and legends you need
- Outline, viewing area and thickness limits from your housing
- LCD operating voltage, or the LCD driver or MCU you plan to use
- Operating and storage temperature
- Connection: metal pins, zebra, FPC or heat seal
- Backlight colour, if any, and the expected annual quantity
Any reference above can be used as a starting point: tell us the model number and what needs to change.



