Thermo-Hygrometer LCD Displays
Thermo-hygrometers and weather stations show temperature and relative humidity side by side, often with a comfort indicator, min/max memory and a clock. Most run for a year or longer on one or two AAA cells, so the display is almost always read without a backlight.
Reflective or transflective TN and HTN glass at a low duty ratio is the common choice. Large digits and a wide viewing angle matter more than resolution, because these units sit on shelves and walls and are read from a distance.
Related guides: Transflective and reflective LCDs · 6 o’clock vs 12 o’clock viewing direction · TN, HTN, STN, FSTN, DFSTN and VA compared · Duty and bias explained · All LCD product references
Thermo-hygrometer LCD references
The table lists 12 thermo-hygrometer LCD references with full drawing data: 7 TN, 3 HTN and 2 VA. LCD operating voltages run from 2.9 V to 4.5 V, and the most common drive is 1/4 duty, 1/3 bias. The widest operating range on these drawings is −40°C to +80°C.
| Model | LCD type | Viewing area | Voltage | Drive | Operating temp. | Connection |
|---|---|---|---|---|---|---|
| S3477D | TN, positive | 67.6 × 67.6 mm | 3.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Zebra (elastomer) connector |
| S4015D | VA, negative | 45.25 × 16.59 mm | 3.3 V | 1/4 duty, 1/3 bias | −10°C to +60°C | Zebra (elastomer) connector |
| S4081D | VA, negative | 29.0 × 32.0 mm | 3.3 V | 1/4 duty, 1/3 bias | −10°C to +60°C | Metal pins |
| S4133D | TN, positive | 62.8 × 53.5 mm | 3.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Zebra (elastomer) connector |
| S4311D | TN, positive | 27.0 × 27.0 mm | 3.0 V | 1/4 duty, 1/2 bias | 0°C to +50°C | Zebra (elastomer) connector |
| S4523D | HTN, positive | 45.14 × 38.24 mm | 3.3 V | 1/4 duty, 1/3 bias | −20°C to +85°C | Metal pins |
| S4527D | HTN, positive | 41.74 × 37.63 mm | 2.9 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Zebra (elastomer) connector |
| S4528D | HTN, positive | 43.0 × 33.0 mm | 3.3 V | 1/4 duty, 1/3 bias | −40°C to +80°C | Zebra (elastomer) connector |
| S4546D | TN, positive | 74.0 × 63.0 mm | 4.5 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Zebra (elastomer) connector |
| S4547D | TN, positive | 74.0 × 63.0 mm | 4.5 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Zebra (elastomer) connector |
| S4548D | TN, positive | 74.0 × 63.0 mm | 4.5 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Zebra (elastomer) connector |
| S4572D | TN, positive | 39.3 × 26.0 mm | 3.0 V | 1/8 duty, 1/3 bias | −20°C to +70°C | Metal pins |
Real samples on video
Short clips of real SuccessLCD samples for this application. Each player loads when you press play.
More working samples: YouTube playlist · SuccessLCD channel
What to send for a custom thermo-hygrometer LCD
- Your display artwork, or a sketch of the digits, icons and legends you need
- Outline, viewing area and thickness limits from your housing
- LCD operating voltage, or the LCD driver or MCU you plan to use
- Operating and storage temperature
- Connection: metal pins, zebra, FPC or heat seal
- Backlight colour, if any, and the expected annual quantity
Any reference above can be used as a starting point: tell us the model number and what needs to change.


