Thermostat LCD Displays
A thermostat display is read from across a room and at an angle, and many units run for a year or more on two AA cells. The usual layout puts a large room-temperature reading next to a smaller setpoint, with heat, cool, fan and schedule icons and often a clock or day field.
HTN and TN glass with a reflective or transflective rear polarizer covers most battery-powered designs. VA negative glass is used when the product needs a black, backlit look on the wall. Viewing direction matters more than on most products: decide whether the user looks down at the unit or straight at it before fixing the glass.
Related guides: 6 o’clock vs 12 o’clock viewing direction · Transflective and reflective LCDs · TN, HTN, STN, FSTN, DFSTN and VA compared · Duty and bias explained · All LCD product references
Thermostat LCD references
The table lists 62 thermostat LCD references with full drawing data: 20 VA, 19 TN, 18 HTN and 5 FSTN. LCD operating voltages run from 2.8 V to 5.6 V, and the most common drive is 1/4 duty, 1/3 bias. The widest operating range on these drawings is −30°C to +80°C.
| Model | LCD type | Viewing area | Voltage | Drive | Operating temp. | Connection |
|---|---|---|---|---|---|---|
| S04806D | HTN, negative | 33.0 × 33.0 mm | 3.0 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Metal pins |
| S3313D | VA, negative | 64.0 × 46.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S3448D | VA, negative | 105.0 × 47.0 mm | 3.3 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S3462D | VA, negative | 60.0 × 34.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S3471D | VA, negative | 68.0 × 51.5 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S3657D | FSTN, positive | 78.4 × 60.0 mm | 4.2 V | 1/8 duty, 1/4 bias | 0°C to +50°C | Metal pins |
| S3699D | TN, positive | 39.0 × 15.0 mm | 3.6 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S3893D | HTN, positive | 58.0 × 44.5 mm | 3.0 V | 1/5 duty, 1/3 bias | −10°C to +60°C | Metal pins |
| S3918D | FSTN, positive | 78.4 × 60.0 mm | 4.2 V | 1/8 duty, 1/4 bias | 0°C to +50°C | Metal pins |
| S3941D | TN, positive | 40.0 × 32.0 mm | 3.6 V | 1/4 duty, 1/3 bias | −30°C to +80°C | Metal pins |
| S3959D | VA, negative | 154.21 × 86.61 mm | 3.3 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S3981D | FSTN, positive | 91.92 × 59.09 mm | 4.2 V | 1/8 duty, 1/4 bias | 0°C to +50°C | Metal pins |
| S4011D | VA, negative | 70.0 × 80.0 mm | 5.0 V | 1/8 duty, 1/4 bias | −20°C to +70°C | Metal pins |
| S4012D | VA, negative | 60.0 × 42.0 mm | 5.0 V | 1/8 duty, 1/4 bias | −20°C to +70°C | Metal pins |
| S4026D | FSTN, positive | 72.8 × 47.5 mm | 4.2 V | 1/8 duty, 1/4 bias | −20°C to +70°C | Metal pins |
| S4027D | FSTN, positive | 71.8 × 47.3 mm | 4.2 V | 1/8 duty, 1/4 bias | −20°C to +70°C | Metal pins |
| S4054D | VA, negative | 68.4 × 59.35 mm | 5.0 V | 1/8 duty, 1/4 bias | −20°C to +70°C | Metal pins |
| S4114D | TN, positive | 26.7 × 40.0 mm | 3.3 V | 1/3 duty, 1/3 bias | +10°C to +65°C | Zebra (elastomer) connector |
| S4121D | HTN, positive | 57.6 × 57.6 mm | 4.2 V | 1/8 duty, 1/4 bias | 0°C to +50°C | — |
| S4124D | HTN, negative | 70.6 × 55.6 mm | 5.0 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Metal pins |
| S4150D | HTN, positive | 40.0 × 43.0 mm | 4.2 V | 1/8 duty, 1/4 bias | 0°C to +50°C | Metal pins |
| S4201D | TN, positive | 60.0 × 70.0 mm | 4.0 V | Static | 0°C to +55°C | Metal pins |
| S4286D | HTN, positive | 62.2 × 59.6 mm | 3.0 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Metal pins |
| S4324D | TN, positive | 42.0 × 42.0 mm | 3.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | FPC |
| S4403D | VA, negative | 66.0 × 65.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4446D | VA, negative | 72.9 × 53.33 mm | 4.3 V | 1/4 duty, 1/3 bias | −20°C to +60°C | Metal pins |
| S4471D | TN, positive | 40.6 × 31.1 mm | 5.0 V | 1/4 duty, 1/3 bias | −10°C to +60°C | Metal pins |
| S4473D | VA, negative | 38.39 × 29.5 mm | 4.0 V | 1/8 duty, 1/4 bias | −20°C to +70°C | FPC |
| S4529D | TN, positive | 68.0 × 60.0 mm | 2.8 V | 1/4 duty, 1/3 bias | −20°C to +60°C | Metal pins |
| S4536D | HTN, positive | 49.0 × 36.0 mm | 5.0 V | 1/8 duty, 1/4 bias | 0°C to +50°C | Metal pins |
| S4571D | HTN, positive | 77.3 × 51.69 mm | 3.0 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Metal pins |
| S4576D | TN, positive | 66.0 × 49.0 mm | 2.8 V | 1/4 duty, 1/3 bias | −20°C to +60°C | Metal pins |
| S4579D | HTN, positive | — | 3.6 V | 1/4 duty, 1/3 bias | −20°C to +60°C | Metal pins |
| S4580D | HTN, positive | 98.0 × 55.0 mm | 3.6 V | 1/4 duty, 1/3 bias | −20°C to +60°C | Metal pins |
| S4581D | HTN, positive | — | 5.0 V | 1/8 duty, 1/4 bias | −20°C to +60°C | Metal pins |
| S4583D | HTN, positive | 98.0 × 55.0 mm | 3.6 V | 1/4 duty, 1/3 bias | −20°C to +60°C | Metal pins |
| S4586D | TN, positive | 50.0 × 61.7 mm | 4.5 V | 1/4 duty, 1/3 bias | −20°C to +60°C | Metal pins |
| S4591D | VA, negative | 33.0 × 23.0 mm | 4.5 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4594D | TN, positive | — | 2.8 V | 1/4 duty, 1/3 bias | −20°C to +60°C | Metal pins |
| S4600D | HTN, positive | 37.3 × 38.5 mm | 3.0 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Zebra (elastomer) connector |
| S4633D | TN, positive | 61.5 × 50.5 mm | 5.0 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Metal pins |
| S4634D | TN, positive | 66.0 × 49.0 mm | 5.6 V | 1/4 duty, 1/3 bias | −10°C to +60°C | Metal pins |
| S4666D | VA, negative | 29.0 × 32.0 mm | 3.3 V | 1/4 duty, 1/3 bias | −10°C to +60°C | Metal pins |
| S4677D | TN, negative | 26.2 × 24.8 mm | 4.0 V | 1/8 duty, 1/4 bias | 0°C to +50°C | Zebra (elastomer) connector |
| S4691D | VA, negative | 48.0 × 35.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | — |
| S4696D | TN, positive | 50.0 × 30.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4705D | TN, positive | 42.0 × 66.2 mm | 3.3 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Metal pins |
| S4706D | HTN, positive | 55.6 × 68.1 mm | 3.0 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Metal pins |
| S4716D | HTN, positive | 90.0 × 23.4 mm | 3.3 V | 1/4 duty, 1/3 bias | 0°C to +50°C | Zebra (elastomer) connector |
| S4729D | HTN, positive | 65.93 × 65.93 mm | 3.0 V | 1/4 duty, 1/3 bias | 0°C to +50°C | FPC |
| S4740D | HTN, positive | 49.0 × 36.0 mm | 5.0 V | 1/8 duty, 1/4 bias | 0°C to +50°C | Metal pins |
| S4766D | VA, negative | 35.5 × 19.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4770D | VA, negative | 37.0 × 20.5 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4788D | VA, negative | 54.0 × 36.5 mm | 5.0 V | 1/8 duty, 1/4 bias | −20°C to +70°C | Metal pins |
| S4790D | TN, positive | 39.0 × 63.0 mm | 4.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Zebra (elastomer) connector |
| S4796D | HTN, positive | 65.0 × 44.5 mm | 4.2 V | 1/8 duty, 1/4 bias | 0°C to +50°C | Metal pins |
| S4817D | TN, positive | 41.5 × 16.9 mm | 3.0 V | 1/4 duty, 1/2 bias | −10°C to +60°C | Zebra (elastomer) connector |
| S4837D | VA, negative | 29.4 × 21.2 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4838D | VA, negative | 54.0 × 40.0 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4841D | VA, negative | 26.6 × 14.5 mm | 5.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4855D | TN, positive | 43.0 × 33.0 mm | 3.0 V | 1/4 duty, 1/3 bias | −20°C to +70°C | Metal pins |
| S4869D | TN, positive | 78.0 × 62.5 mm | 4.3 V | 1/4 duty, 1/2 bias | 0°C to +50°C | Metal pins |
More thermostat references
Real samples on video
Short clips of real SuccessLCD samples for this application. Each player loads when you press play.
More working samples: YouTube playlist · SuccessLCD channel
What to send for a custom thermostat LCD
- Your display artwork, or a sketch of the digits, icons and legends you need
- Outline, viewing area and thickness limits from your housing
- LCD operating voltage, or the LCD driver or MCU you plan to use
- Operating and storage temperature
- Connection: metal pins, zebra, FPC or heat seal
- Backlight colour, if any, and the expected annual quantity
Any reference above can be used as a starting point: tell us the model number and what needs to change.



