LCDs for Power Supplies, Chargers and Power Stations

Power supplies, chargers and portable power stations use the display for input and output watts, voltage and current, battery percentage and time to full or empty, often with AC, DC, USB and fault icons. The glass sits next to heat sources, so the operating temperature on the drawing deserves a second look.

A negative VA panel with a white or coloured backlight is the usual look on portable power stations and chargers. Positive TN glass is used on simpler indicators where the display is read under room light.

Power supply and charger LCD references

The table lists 19 power supply and charger LCD references with full drawing data: 16 VA and 3 TN. LCD operating voltages run from 3.0 V to 5.0 V, and the most common drive is 1/4 duty, 1/3 bias. The widest operating range on these drawings is −30°C to +80°C.

ModelLCD typeViewing areaVoltageDriveOperating temp.Connection
S3321DVA, negative90.0 × 30.5 mm4.5 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S3395DVA, negative62.0 × 15.0 mm5.0 V1/4 duty, 1/2 bias−20°C to +70°CMetal pins
S3470DTN, positive66.5 × 51.5 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S364901DVA, negative35.0 × 13.0 mm5.0 V1/4 duty, 1/3 bias−30°C to +80°CMetal pins
S3656DVA, negative111.0 × 50.0 mm4.5 V1/8 duty, 1/4 bias−20°C to +70°CMetal pins
S3666DVA, negative38.0 × 67.5 mm4.5 V1/8 duty, 1/4 bias−20°C to +70°CMetal pins
S3695DVA, negative71.0 × 32.0 mm4.5 V1/8 duty, 1/3 bias−20°C to +70°CMetal pins
S3727DVA, negative104.0 × 54.0 mm4.5 V1/8 duty, 1/3 bias−20°C to +70°CMetal pins
S3730DVA, negative108.0 × 60.0 mm5.0 V1/8 duty, 1/4 bias−20°C to +70°CFPC
S3742DVA, negative110.0 × 45.0 mm4.5 V1/8 duty, 1/3 bias−20°C to +70°CMetal pins
S3790DVA, negative58.0 × 48.0 mm4.0 V1/8 duty, 1/4 bias−20°C to +70°CMetal pins
S3992DVA, negative44.8 × 29.7 mm3.3 V1/4 duty, 1/3 bias−20°C to +60°CMetal pins
S4271DVA, negative24.4 × 26.0 mm4.5 V1/6 duty, 1/3 bias−20°C to +70°CMetal pins
S4295DVA, negative57.6 × 27.0 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4412DTN, positive37.0 × 29.0 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4437DVA, negative44.04 × 20.97 mm5.0 V1/8 duty, 1/4 bias−20°C to +70°CMetal pins
S4464DVA, negative51.0 × 41.0 mm5.0 V1/4 duty, 1/3 bias−30°C to +80°CMetal pins
S4480DVA, negative71.0 × 32.0 mm4.5 V1/8 duty, 1/3 bias−20°C to +70°CMetal pins
S4713DTN, positive20.5 × 10.55 mm3.0 V1/2 duty, 1/2 bias−20°C to +60°CMetal pins

More power supply and charger references

  • S3251D — Segment LCD for power supplies, 89.0 × 21.0 mm viewing area
  • S3368D — Segment LCD for power supplies, 71.0 × 32.0 mm viewing area
  • S4210D — Chip-on-Board LCD

Real samples on video

Short clips of real SuccessLCD samples for this application. Each player loads when you press play.

S3730D LCD sample in operation
S3730D · Portable power station
S3321D LCD sample in operation
S3321D · Power supply
S3742D LCD sample in operation
S3742D · Power supply

What to send for a custom power supply and charger LCD

  • Your display artwork, or a sketch of the digits, icons and legends you need
  • Outline, viewing area and thickness limits from your housing
  • LCD operating voltage, or the LCD driver or MCU you plan to use
  • Operating and storage temperature
  • Connection: metal pins, zebra, FPC or heat seal
  • Backlight colour, if any, and the expected annual quantity

Any reference above can be used as a starting point: tell us the model number and what needs to change.

Send your power supply and charger LCD requirements

Scroll to Top
Get a QuoteWhatsApp