Measuring Instrument LCD Displays

Handheld and bench instruments—testers, meters, calipers, refractometers and environmental monitors—need sharp digits, unit legends and status icons that stay legible over the full working temperature range. Many also need a bar graph or a second reading on the same glass.

TN, HTN and FSTN positive glass with a transflective polarizer is the common choice where the instrument is read in daylight; VA negative glass is used where it is mostly read with the backlight on. Several references below are rated for −30°C or lower, which is worth checking if your instrument works outdoors.

Measuring instrument LCD references

The table lists 31 measuring instrument LCD references with full drawing data: 10 TN, 8 FSTN, 7 VA and 6 HTN. LCD operating voltages run from 3.0 V to 9.0 V, and the most common drive is 1/4 duty, 1/3 bias. The widest operating range on these drawings is −40°C to +80°C.

ModelLCD typeViewing areaVoltageDriveOperating temp.Connection
S04831DFSTN, positive51.0 × 17.4 mm3.0 V1/8 duty, 1/3 bias−35°C to +80°CMetal pins
S2551DHTN, positive72.52 × 33.24 mm5.0 V1/4 duty, 1/3 bias−30°C to +80°CMetal pins
S2917DFSTN, positive72.0 × 40.0 mm9.0 V1/65 duty, 1/9 bias−20°C to +70°C—
S2957-02DFSTN, positive29.0 × 16.35 mm9.0 V1/64 duty, 1/9 bias−30°C to +75°C—
S2957DFSTN, positive29.0 × 16.35 mm9.0 V1/64 duty, 1/9 bias−30°C to +75°C—
S3705DVA, negative77.0 × 50.0 mm5.0 V1/8 duty, 1/4 bias−20°C to +70°CMetal pins
S3733DVA, negative27.43 × 27.43 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4014DTN, positive72.39 × 21.59 mm3.6 V1/2 duty, 1/2 bias−20°C to +70°CMetal pins
S4041DTN, positive22.59 × 20.05 mm3.3 V1/2 duty, 1/2 bias−20°C to +70°CMetal pins
S4097DFSTN, positive92.0 × 38.0 mm3.7 V1/4 duty, 1/3 bias−30°C to +60°CMetal pins
S4120DVA, negative46.8 × 27.8 mm5.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4135DTN, positive45.0 × 23.0 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4186DHTN, negative50.0 × 46.5 mm4.5 V1/4 duty, 1/3 bias−30°C to +80°CMetal pins
S4196DHTN, negative62.6 × 38.9 mm5.0 V1/4 duty, 1/3 bias−30°C to +80°CMetal pins
S4277DVA, negative22.4 × 32.0 mm3.3 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4326DTN, positive147.0 × 42.0 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4386DFSTN, positive34.6 × 29.6 mm3.3 V1/4 duty, 1/3 bias−40°C to +80°CFPC
S4427DTN, positive38.4 × 27.5 mm5.0 V1/4 duty, 1/3 bias−30°C to +80°CHeat-seal connector
S4429DHTN, positive35.0 × 19.0 mm5.0 V1/4 duty, 1/3 bias−30°C to +80°CHeat-seal connector
S4553DVA, negative105.0 × 60.0 mm3.6 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4711DFSTN, positive54.0 × 46.0 mm3.0 V1/8 duty, 1/4 bias−20°C to +70°CMetal pins
S4717DHTN, positive66.0 × 40.5 mm3.3 V1/4 duty, 1/3 bias−20°C to +70°CZebra (elastomer) connector
S4718DHTN, positive66.0 × 40.5 mm3.3 V1/4 duty, 1/3 bias−20°C to +70°CZebra (elastomer) connector
S4746DFSTN, positive42.4 × 20.2 mm3.0 V1/4 duty, 1/2 bias0°C to +50°CZebra (elastomer) connector
S4816DVA, negative60.0 × 60.0 mm5.0 V1/4 duty, 1/3 bias−30°C to +70°CMetal pins
S4840DTN, positive66.0 × 20.0 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4843DTN, positive65.6 × 20.58 mm3.3 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4844DVA, negative40.0 × 11.8 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4856DTN, positive38.0 × 28.0 mm3.0 V1/4 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector
S4863DTN, positive28.5 × 28.0 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4865DTN, positive51.0 × 27.0 mm3.0 V1/4 duty, 1/3 bias−30°C to +80°CMetal pins

More measuring instrument references

  • S2396D — Segment LCD for measuring instruments, 54.0 × 33.0 mm viewing area
  • S3060D — Segment LCD for measuring instruments, 60.0 × 80.0 mm viewing area
  • S3516D — Instrument HTN LCD with dual numeric rows and unit legends
  • S4745D — FSTN segment LCD with inch and millimetre legends
  • S4747D — FSTN LCD

Real samples on video

Short clips of real SuccessLCD samples for this application. Each player loads when you press play.

S4261D LCD sample in operation
S4261D · Instrument, FSTN
S3938D LCD sample in operation
S3938D · Dose meter
S3516D LCD sample in operation
S3516D · Test instrument

What to send for a custom measuring instrument LCD

  • Your display artwork, or a sketch of the digits, icons and legends you need
  • Outline, viewing area and thickness limits from your housing
  • LCD operating voltage, or the LCD driver or MCU you plan to use
  • Operating and storage temperature
  • Connection: metal pins, zebra, FPC or heat seal
  • Backlight colour, if any, and the expected annual quantity

Any reference above can be used as a starting point: tell us the model number and what needs to change.

Send your measuring instrument LCD requirements

Scroll to Top
Get a QuoteWhatsApp