Display layout
Share the digits, symbols, icons or graphics needed for your clock interface.
Navigate

Six rendered views of S4815D. Select a thumbnail to switch views.
Front visualization of S4815D, an LCD reference design for clocks. The generated image illustrates product appearance; final construction is defined for the OEM project.
OEM DISPLAY REFERENCE · TN
S4815D is a TN positive-mode segment LCD for clocks, with a 96.0 × 53.5 mm viewing area. The reference drawing specifies 5.0 V drive, a 0°C to +50°C operating range and a 6 o’clock viewing direction. Use it as the starting point for your OEM layout, connector and enclosure discussion.
Tell us your display layout, quantity and target application.
Images and parameters are reference information taken from the product drawing. Final dimensions, electrical requirements and construction are confirmed for your project.
01 / REFERENCE CONFIGURATION
A reference configuration for discussing your LCD project. Final specifications are subject to project confirmation.
Need different digits, icons or outline? See custom segment LCD design.
| Model reference | S4815D |
|---|---|
| Display mode | TN, positive |
| Polarizers (front / rear) | Transmissive / transmissive (needs backlight) |
| Viewing direction | 6 o’clock |
| Operating temperature | 0°C to +50°C |
| Storage temperature | −10°C to +60°C |
| LCD operating voltage | 5.0 V |
| Drive condition | 1/4 duty, 1/3 bias |
| Frame frequency | 64 Hz |
| Connector | Heat-seal connector |
| Pin / contact pitch | 1.5 mm pitch |
| Viewing area | 96.0 × 53.5 mm minimum |
| Glass outline | 99.0 × 59.0 mm |
02 / OEM DESIGN
Bring your requirements. We will review the configuration with you.
Share the digits, symbols, icons or graphics needed for your clock interface.
Define the viewing window, available space, mounting method and connection position.
Confirm your host controller, supply, drive method and backlight requirements before sampling.
03 / APPLICATION DIRECTION
S4815D is presented as a reference for clocks. Review the drawing-based specification and the six product views, then tell us what your clock needs to show.
Identify the readings, status indicators and control feedback your users need to see.
Coordinate the display opening, viewing direction and connection with the complete product.
Agree the display configuration and sample requirements with our team.
ENGINEERING NOTES
How S4815D relates to LCD mode, drive, connection and integration choices, with links to the SuccessLCD engineering guides.
Twisted nematic glass: the simplest, lowest-cost LCD mode, best with low-duty drive and a defined viewing direction. Compare TN, HTN, STN, FSTN, DFSTN and VA →
4 common electrodes share the segment lines. Set the controller to the duty, bias, voltage and frame frequency on the drawing. Duty and bias explained →
04 / PRODUCT SUPPORT
This page presents a reference design for OEM discussions. The final specification and available customization are confirmed against your project requirements.
Include S4815D, your application, display artwork, enclosure dimensions, electrical requirements, sample and production quantities, and target schedule.
The reference drawing for S4815D specifies a 1/4 duty, 1/3 bias drive condition, 5.0 V LCD operating voltage, an operating temperature of 0°C to +50°C and a storage temperature of −10°C to +60°C. The rear polarizer is transmissive, so the display is designed to be used with a backlight. These values can be adjusted for your project.
YOUR NEXT LCD PROJECT
Start with S4815D and tell us what your product needs.