Blood Pressure Monitor LCD Displays

Blood pressure monitors show systolic and diastolic pressure in large digits with a smaller pulse reading, plus memory, user, date and battery icons, and usually an irregular-heartbeat symbol. Most are battery powered and read under room light, so the glass has to be clear without a backlight and run at a low voltage.

The references below are segment LCDs we have built for this kind of device. The digit height, icon set and outline are always drawn for the customer’s housing, so treat them as starting points for size and drive conditions rather than fixed parts.

Blood pressure monitor LCD references

The table lists 21 blood pressure monitor LCD references with full drawing data: 14 TN, 4 VA and 3 HTN. LCD operating voltages run from 3.0 V to 4.4 V, and the most common drive is 1/6 duty, 1/3 bias. The widest operating range on these drawings is −20°C to +70°C.

ModelLCD typeViewing areaVoltageDriveOperating temp.Connection
S3197DTN, positive29.0 × 34.5 mm4.0 V1/6 duty, 1/3 bias0°C to +50°CHeat-seal connector
S3481DTN, positive53.5 × 75.0 mm3.3 V1/6 duty, 1/3 bias0°C to +50°CHeat-seal connector
S3865DVA, negative30.0 × 15.0 mm4.0 V1/6 duty, 1/3 bias−20°C to +70°CFPC
S3994DTN, positive62.0 × 85.0 mm4.0 V1/4 duty, 1/3 bias0°C to +50°CHeat-seal connector
S4062DTN, negative74.0 × 75.0 mm3.0 V1/4 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector
S4139DHTN, positive102.0 × 74.8 mm3.2 V1/6 duty, 1/3 bias0°C to +50°CHeat-seal connector
S4167DTN, positive62.0 × 81.0 mm3.3 V1/6 duty, 1/3 bias0°C to +50°CHeat-seal connector
S4243DTN, negative27.0 × 57.5 mm3.3 V1/6 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector
S4274DTN, positive74.0 × 76.7 mm3.3 V1/6 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector
S4275DVA, negative70.0 × 83.12 mm3.3 V1/6 duty, 1/3 bias0°C to +50°CHeat-seal connector
S4276DVA, negative74.0 × 76.7 mm3.3 V1/6 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector
S4303DHTN, positive114.2 × 72.8 mm3.0 V1/4 duty, 1/3 bias−10°C to +60°CZebra (elastomer) connector
S4388DVA, negative124.2 × 80.7 mm3.3 V1/8 duty, 1/3 bias−10°C to +60°CHeat-seal connector
S4455DTN, positive69.0 × 70.5 mm3.3 V1/6 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector
S4507DHTN, positive91.1 × 107.4 mm3.6 V1/6 duty, 1/3 bias−20°C to +70°CZebra (elastomer) connector
S4665DTN, positive119.5 × 77.0 mm4.4 V1/6 duty, 1/3 bias0°C to +50°CHeat-seal connector
S4708DTN, positive53.5 × 75.0 mm3.0 V1/6 duty, 1/3 bias0°C to +50°CHeat-seal connector
S4723DTN, positive70.0 × 78.0 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CHeat-seal connector
S4724DTN, positive63.6 × 65.6 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CHeat-seal connector
S4731DTN, positive52.0 × 65.0 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector
S4780DTN55.3 × 40.0 mm3.3 V1/6 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector

More blood pressure monitor references

  • S3966D — Large HTN LCD with pressure and timing artwork

Real samples on video

Short clips of real SuccessLCD samples for this application. Each player loads when you press play.

S3966D LCD sample in operation
S3966D · Blood pressure monitor

What to send for a custom blood pressure monitor LCD

  • Your display artwork, or a sketch of the digits, icons and legends you need
  • Outline, viewing area and thickness limits from your housing
  • LCD operating voltage, or the LCD driver or MCU you plan to use
  • Operating and storage temperature
  • Connection: metal pins, zebra, FPC or heat seal
  • Backlight colour, if any, and the expected annual quantity

Any reference above can be used as a starting point: tell us the model number and what needs to change.

Send your blood pressure monitor LCD requirements

Scroll to Top
Get a QuoteWhatsApp