LCD Displays for Dog Training Remotes

Remote trainers show the selected dog or channel, the stimulation level, the mode (vibration, tone or static) and battery state for the remote and often for the collar too. The handset is used outdoors and at night, and it is small, so every icon has to earn its space.

Most of the references below use VA negative glass with a backlight, which reads well in shade and in the dark; TN and FSTN positive glass appears on units that put battery life first. All of them run at around 3 V, which matches a single lithium cell after regulation.

Dog training remote LCD references

The table lists 19 dog training remote LCD references with full drawing data: 13 VA, 4 TN and 2 FSTN. LCD operating voltages run from 3.0 V to 3.3 V, and the most common drive is 1/4 duty, 1/3 bias. The widest operating range on these drawings is −20°C to +70°C.

ModelLCD typeViewing areaVoltageDriveOperating temp.Connection
S3912DVA, negative40.0 × 20.2 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S3917DVA, negative32.6 × 29.3 mm3.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S3956DVA, negative28.0 × 23.0 mm3.3 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4038DVA, negative31.8 × 38.2 mm3.0 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4046DVA, negative38.0 × 21.0 mm3.3 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4052DVA, negative35.4 × 31.7 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4131DTN, positive16.7 × 10.6 mm3.0 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4168DVA, negative38.0 × 21.0 mm3.3 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4170DFSTN, positive36.9 × 17.9 mm3.3 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4200DVA, negative27.4 × 54.1 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4322DTN, positive17.7 × 11.6 mm3.0 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4352DVA, negative34.0 × 51.0 mm3.0 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4400DVA, negative25.0 × 34.3 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4432DFSTN, positive17.9 × 37.0 mm3.3 V1/4 duty, 1/3 bias−20°C to +70°CZebra (elastomer) connector
S4449DVA, negative37.0 × 15.64 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4537DVA, negative25.99 × 23.5 mm3.3 V1/4 duty, 1/3 bias0°C to +50°CMetal pins
S4715DTN, positive29.1 × 19.0 mm3.0 V1/4 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector
S4719DVA, negative25.29 × 19.59 mm3.0 V1/4 duty, 1/3 bias−20°C to +70°CMetal pins
S4739DTN, positive29.0 × 19.0 mm3.0 V1/4 duty, 1/3 bias0°C to +50°CZebra (elastomer) connector

Real samples on video

Short clips of real SuccessLCD samples for this application. Each player loads when you press play.

S4170D LCD sample in operation
S4170D · Dog training device
S3912D LCD sample in operation
S3912D · Dog training device
S4038D LCD sample in operation
S4038D · Dog training device

What to send for a custom dog training remote LCD

  • Your display artwork, or a sketch of the digits, icons and legends you need
  • Outline, viewing area and thickness limits from your housing
  • LCD operating voltage, or the LCD driver or MCU you plan to use
  • Operating and storage temperature
  • Connection: metal pins, zebra, FPC or heat seal
  • Backlight colour, if any, and the expected annual quantity

Any reference above can be used as a starting point: tell us the model number and what needs to change.

Send your dog training remote LCD requirements

Scroll to Top
Get a QuoteWhatsApp