3.1-Inch Round TFT LCD · 480 × 480 · 50-Pin Parallel RGB

S31H3P76D 3.1-Inch 480×480 Round TFT LCD

Updated · SuccessLCD Engineering Team

S31H3P76D is a 3.1-inch, 480 × 480 round TFT LCD for OEM display evaluation. The reviewed configuration uses a VA normally-black a-Si TFT active matrix, 16.7-million-color 24-bit parallel RGB (8 bits per color channel) input and a 50-pin FPC. Its documented outline is 88.83 × 91.43 × 5.60 mm, with a 78.62 mm-diameter active area.

Document-control notice: this technical profile is based on specification S31H3P76D, Version 0.0, issued February 15, 2023. The source is marked TENTATIVE, under development and subject to change. Use it for initial evaluation only; the controlled documents supplied during quotation or engineering review govern the design.

SuccessLCD currently accepts RFQs for S31H3P76D. RFQ acceptance does not confirm stock, sample availability, MOQ, price or lead time; share your timing, enclosure, environment, quantity and project date for review.


S31H3P76D Key Specifications

The values below are transcribed from the supplied model-specific source. Parenthesized source values and measurement conditions remain qualified; the quoted controlled revision takes priority.

ModelS31H3P76D
Source controlSpecification S31H3P76D · Version 0.0 · Issue 2023-02-15
Source statusTentative · under development · specifications subject to change
Display size / shape3.1-inch · round
Resolution480 × 480 RGB pixels
Display technologyVA · normally black · a-Si TFT active matrix
Color / dot arrangement16,777,216 colors · 8 bits per RGB channel · RGB stripe
Host interface24-bit parallel RGB (8 bits per color channel) · 50-pin FPC
Module outline88.83 ±0.2 × 91.43 ±0.2 × 5.60 ±0.05 mm · FPC excluded from outline dimensions
Active area78.62 mm diameter
RGB-dot pitch54.6 × 163.8 µm · source calls this dot pitch, not square-pixel pitch
Reference weight50.0 g including FPC · parenthesized Version 0.0 source value
FPC directionDownward in the source drawing view
Applicable mating connector50-pin, 0.5 mm pitch FPC connector · confirm the mating part number, orientation and availability with SuccessLCD
Recommended suppliesVDD 3.0–3.6 V, 3.3 V typical · IOVDD 3.0–3.6 V, 3.3 V typical
Operating temperature−30 to +85 °C panel-surface temperature
Storage temperature−40 to +95 °C
BacklightWhite LED · 14 mA typical · 18.3 V typical / 19.6 V maximum at 25 °C
Center brightness420 cd/m² minimum · 600 cd/m² typical at IL = 14 mA and 25 °C
Contrast ratio420 minimum · 700 typical at 25 °C under the source method
Viewing angle80° minimum left, right, up and down at CR ≥ 10
Response timeSource table reports TON + TOFF at 50 ms maximum · confirm on the controlled revision
Brightness distribution70% minimum under the source optical measurement conditions

Optical values are documented at VDD 3.3 V, optimized VCOMDC, backlight current IL = 14.0 mA and ambient temperature 25 °C. System readability depends on cover materials, reflections, backlight drive, temperature and viewing environment.

S31H3P76D Mechanical Drawing

The public mechanical sheet preserves the source technical geometry at the original A2 page coordinates. The public reference preserves the source technical geometry and carries the SuccessLCD document-control block. Use annotated dimensions and the controlled source revision for engineering decisions. At 100% PDF print scale, the source sheet retains its stated scales: the main view is S=1/1 and DETAIL A is S=2/1. Browser display is not a physical template; annotated dimensions and tolerances govern.

S31H3P76D 3.1-inch round TFT LCD mechanical drawing with dimensions and 50-pin FPC orientation
S31H3P76D module mechanical reference · Specification S31H3P76D, Version 0.0 (Tentative). Annotated dimensions and tolerances govern.

Download the S31H3P76D mechanical reference PDF for engineering review. The source drawing identifies a 50-pin 0.50 mm-pitch FPC, Pin 1/50 direction and a 50-pin, 0.5 mm pitch mating connector.

S31H3P76D 50-Pin Parallel RGB Pinout

The clean pin sheet was reconstructed field by field from source page 12/29 and checked for a contiguous 1–50 sequence. The grouped map below covers every pin while remaining readable on mobile.

S31H3P76D 50-pin parallel RGB TFT LCD pin assignment table
S31H3P76D 50-pin parallel RGB assignment · Version 0.0 (Tentative). Confirm timing and connector orientation before PCB release.
PinsSignalsFunction / control
1GNDGround
2BL_ALED anode
3–4BL_CLED cathode
5–6, 42IOVDD3.3 V nominal I/O supply
7–8VDD3.3 V nominal circuit supply
9–16R7–R0Red data, MSB to LSB
17–24G7–G0Green data, MSB to LSB
25–32B7–B0Blue data, MSB to LSB
33, 37, 39, 41, 43–45, 50GNDGround
34HSYNCHorizontal synchronization · negative polarity
35, 47, 49NCOpen
36VSYNCVertical synchronization · negative polarity
38DEData enable · positive polarity
40CLKData latched at the falling edge
46STBYBHigh: normal operation · Low: standby
48RESETBLow-active reset

The source marks HSYNC and VSYNC with a DE-mode note: when DE mode is used, they may be fixed High or Low. Confirm final timing, contact orientation and the controlled pin assignment before PCB release. Download the complete 50-pin reference PDF.

What to Check Before Designing In This Round TFT LCD

  1. Confirm the interface. The reviewed profile uses 24 RGB data lines plus CLK, DE, synchronization, standby and reset controls on a 50-pin FPC. Do not assume MIPI, LVDS, SPI, I²C or MCU-bus compatibility.
  2. Check voltage and timing together. VDD and IOVDD are documented at 3.0–3.6 V with 3.3 V typical. Share the host timing and logic levels for review rather than relying on pin count alone.
  3. Review the round mechanical stack. Compare the 88.83 × 91.43 mm outline, 78.62 mm-diameter active area, 5.60 mm thickness, lower frame/FPC extension, recesses and Pin 1 direction with the enclosure and PCB.
  4. Validate the backlight drive. The source lists IL = 14 mA typical and VF = 18.3 V typical / 19.6 V maximum at 25 °C. Confirm the actual driver, current regulation and thermal conditions.
  5. Treat Version 0.0 as provisional. Do not release tooling or production files from a browser image. Use the controlled drawing and specification supplied with the written quotation or engineering approval.

For related engineering checks, see the TFT LCD interface guide, LCD drawing and specification review checklist, FPC compatibility guide and resolution and active-area guide.

What This S31H3P76D Profile Does Not Assert

The supplied technical source does not establish every commercial or current-production fact. To keep the page traceable, the following items remain intentionally unstated until supported by model- and revision-specific evidence:

  • Stock, sample availability, fixed MOQ, price, lead time or delivery schedule
  • Current lifecycle or final-production status
  • Driver IC identity or touch-panel configuration
  • Current compliance certification, reliability result, packing specification or guaranteed LED lifetime
  • Automotive, medical, aerospace or other application-grade approval

Frequently Asked Questions

What is S31H3P76D?

S31H3P76D is a 3.1-inch round TFT LCD with 480 × 480 RGB pixels. The reviewed Version 0.0 profile documents a VA normally-black a-Si TFT active matrix, a 50-pin 24-bit parallel RGB (8 bits per color channel) interface and an 88.83 × 91.43 × 5.60 mm outline.

What interface does S31H3P76D use?

The reviewed module uses a 50-pin 24-bit parallel RGB (8 bits per color channel) interface with R7–R0, G7–G0, B7–B0, CLK, DE, HSYNC, VSYNC, STBYB and RESETB signals. Pin count alone is not a compatibility test; confirm timing, voltage and connector orientation.

What are the module and active-area dimensions?

The source drawing gives an 88.83 ±0.2 × 91.43 ±0.2 × 5.60 ±0.05 mm module outline and a 78.62 mm-diameter active area. The FPC is excluded from the outline dimensions. Use the controlled drawing for enclosure and PCB release.

How should the drawing scale be interpreted?

At exactly 100% PDF print scale, the source sheet retains the stated scales: the main view is S=1/1 and DETAIL A is S=2/1. Browser zoom, responsive resizing and printer scaling can change physical size. Annotated dimensions and tolerances—not measured screen or print line length—govern the design.

Is the S31H3P76D Version 0.0 datasheet a final production specification?

No. The reviewed S31H3P76D datasheet, specification S31H3P76D Version 0.0, is marked Tentative, under development and subject to change. It supports initial engineering evaluation. Confirm the controlled specification, drawing, timing and commercial status supplied with the quotation before committing tooling or production.

Is S31H3P76D currently accepted for quotation?

Yes. SuccessLCD currently accepts RFQs for S31H3P76D. That statement does not confirm stock, sample availability, MOQ, price or lead time. Those items, together with the controlled document revision and engineering fit, are confirmed in the written response.

Request a S31H3P76D Engineering and Commercial Review

Send the information available now so SuccessLCD can review the S31H3P76D interface, mechanical fit and quotation scope without turning a tentative source value into an unchecked design assumption.

  • Application and project stage
  • Sample request and forecast quantity
  • Host processor, RGB timing, VDD/IOVDD and backlight-driver plan
  • Enclosure opening, PCB/FPC position and connector orientation
  • Operating temperature, ambient-light and viewing requirements
  • Touch or cover-lens requirement, if any, for separate feasibility review
  • Target project date and destination country
Scroll to Top
Get a QuoteWhatsApp