Driver and viewing direction
The reference uses 1/6 duty, 1/3 bias at 3.0 V and 64 Hz, with a 6 o'clock viewing direction. Confirm the driver waveform and reading orientation for your project.
PRODUCT EXPLORERFront view
Rotate, zoom and inspect the product. Loads on request.
Front product rendering of S4101D, showing temperature and humidity fields, high/low records and DRY, COMFORT and WET indicators on a white background.
OEM DISPLAY REFERENCE
S4101D
HTN LCD with temperature, humidity and comfort artwork
S4101D combines temperature and humidity fields, high/low records and DRY, COMFORT and WET indicators. The drawing specifies HTN, positive mode and 1/6 duty, 1/3 bias at 3.0 V.
74.50 × 74.50 mmMinimum viewing area
HTN, positiveDisplay mode
A starting point for your custom display.
Images, 3D geometry and listed parameters are OEM reference information. Final dimensions, electrical requirements, optical configuration and construction are confirmed for your project.
Product video
Short product video. Playback starts when you press play.
01 / REFERENCE CONFIGURATION
Start with the essentials.
A reference configuration for discussing your LCD project. Final specifications are subject to project confirmation.
| Model reference | S4101D |
|---|---|
| Display mode | HTN, positive |
| Drive condition | 1/6 duty, 1/3 bias |
| LCD operating voltage | 3.0 V |
| Frame frequency | 64 Hz |
| Viewing direction | 6 o'clock |
| Operating temperature | 0 °C to +50 °C |
| Storage temperature | -10 °C to +60 °C |
| Front polarizer | Transmissive, adhesive |
| Rear polarizer | Transmissive, adhesive |
| Connection | Elastomeric connector |
| Minimum viewing area | 74.50 × 74.50 mm |
02 / OEM DESIGN
Make the display fit your product.
Bring your requirements. We will review the configuration with you.
Mechanical integration
Plan the housing around the square glass and side contacts. Keep the 74.50 × 74.50 mm minimum viewing area clear.
03 / APPLICATION DIRECTION
Indoor temperature and humidity displays
The source application is indoor temperature and humidity displays. The shown symbols are fixed LCD artwork; sensing, calculations and control functions are specified in the complete device.
ENGINEERING NOTES
What the specification means for your design.
How S4101D relates to LCD mode, drive, connection and integration choices, with links to the SuccessLCD engineering guides.
HTN LCD mode
High twisted nematic glass: better contrast and a wider viewing angle than TN at a similar cost. Compare TN, HTN, STN, FSTN, DFSTN and VA →
Drive: 1/6 duty, 1/3 bias
6 common electrodes share the segment lines. Set the controller to the duty, bias, voltage and frame frequency on the drawing. Duty and bias explained →
Connection: zebra connector
An elastomeric connector presses the glass contacts against PCB pads; the housing or a bracket provides the clamping force. LCD connection types →
04 / PRODUCT SUPPORT
From reference to your design.
Is this a complete device?
No. This page describes an LCD reference. Sensors, control electronics and firmware are specified separately.
Can the artwork be customized?
The displayed legends belong to this reference. Different digits, wording or symbols are confirmed as a custom variant for your project.
YOUR NEXT LCD PROJECT
Let’s shape your display.
Share your required display content, enclosure space, drive arrangement, operating environment and target quantity.
