Display Supplier for Design Houses and EMS: Samples, Drawings and Lifecycle

When a design house picks a display, it is choosing for a client who will build that product for years, often through an EMS the design house has never met. What helps most is data early in the project, a catalogue panel adapted to the product rather than a ground-up design, and a supply arrangement that survives the handover from the design team to the client’s purchasing. This page explains what we send at each stage, what can be changed on a catalogue module, and what an EMS needs from us on the line. We supply TFT modules, monochrome and segment LCDs, touch panels and cover glass, with production orders from 1,000 pieces.

Request a quote TFT LCD catalogue

What you get from us at each stage of the project

StageWhat the design team needsWhat we send
ConceptA short list of displays that fit the size, interface and budgetCatalogue references with datasheets, outline drawings and interface notes
PrototypeWorking samples and the data to bring them up on the hostSamples arranged per project, timing table, initialization sequence, touch settings, connector pin map
Design freezeA drawing both sides sign, with the changes agreedApproval drawing and specification with a revision number, covering FPC, backlight, touch and cover glass changes
Pilot runAgreed test and inspection criteriaTest conditions for the module; you can use our sample validation checklist as a starting point
Production and handoverA supply the client can rely on after you hand overWritten change notices, last-time-buy terms and the same approval drawing for whoever places the orders

Start from a catalogue panel, then change what sits around it

The LCD cell is made in high volume on fixed tooling, so its size and resolution cannot be changed for one project. Almost everything around it can: the FPC length, shape and pinout, the backlight brightness and connector, the touch panel, the cover glass and its printing, and whether the stack is bonded. Starting from a catalogue cell keeps sample time short and leaves no cell tooling cost in the quote. The details are on what can be customized on a TFT module and custom LCD solutions.

Segment LCDs are the exception. A fixed-icon segment display is designed from scratch for each product, and the glass layout is part of the design work. If your product only shows numbers and a few icons, a custom segment LCD often costs less in production and uses far less power than a TFT.

Approval drawings and who owns them

The approval drawing is the contract for the part: outline, active area, pin assignment, electrical and optical values, and the agreed changes. Make sure it carries a revision number and that every later change comes with a new revision. At the quote stage, tell us who will place the production orders, whether your company, your client, or your client’s EMS, so the approval drawing and the quote are issued to the right party from the start. Our page on OEM vs ODM vs CM for LCD displays covers who owns the drawing and tooling in each arrangement, and the drawing and specification review checklist lists what to check before signing.

Change notices and end of life

A client will hold you responsible if the display changes after launch, so put the notice terms in writing before production. Many supply agreements borrow the 90-day advance notice of J-STD-046 for changes to materials, process or drawing, and add a last-time-buy window for parts that go end of life. Ask for both. Our guide to component obsolescence in TFT displays shows which parts usually go end of life first and how to size a last-time buy.

What the EMS needs on the line

If an EMS builds the product, agree a few practical points before the first delivery:

  • Packaging. Trays or holders that protect the FPC and the cover glass, in ESD-safe packaging, with the quantity per tray and per carton stated.
  • Labels and traceability. A lot or date code on each carton, so a field problem can be traced back to a production batch.
  • Incoming inspection. Which functions are tested and which cosmetic criteria apply, written into the specification rather than decided on the line.
  • Handling. FPCs crack if folded tighter than their rated bend radius, and display driver lines are sensitive to ESD. Our LCD ESD protection guide covers handling and test levels.

Quantities and certificates

We take OEM projects with production orders from 1,000 pieces. The group factory that builds our modules holds IATF 16949, ISO 9001 and ISO 14001 certificates; the certificates are issued to the factory. To start, send the product type, the display you have in mind or the constraints (size, interface, touch, environment), the project stage and the expected yearly volume. The TFT module RFQ checklist lists the rest.

Design house and EMS FAQs

Do you support design houses that specify the display but do not place the production orders?

Yes. We supply datasheets, drawings and samples during the design, and issue the approval drawing and quote to whichever company will place the production orders, whether that is the design house, its client or the client’s EMS.

What can be changed on a catalogue TFT module?

The FPC, backlight, touch panel, cover glass and bonding can usually be changed. The size and resolution of the LCD cell cannot, because the cell is made on fixed tooling.

What change notice should a supply agreement require?

Many agreements use the 90-day advance notice of J-STD-046 for changes to materials, process or drawing, plus a last-time-buy window if a part goes end of life.

What is the minimum order quantity?

Production orders start at 1,000 pieces. Samples are arranged per project during the design phase.

Choosing a display for a client project? Send the product type, constraints and project stage, and we will reply with catalogue options and the next step. Start a design-house project.

Scroll to Top
Get a QuoteWhatsApp